Sony Laptop VPCY11 User Manual

User Guide  
Personal Computer  
VPCY11 Series  
 
 
3
 
 
Before Use >  
4
Before Use  
Congratulations on your purchase of this Sony VAIO® computer and welcome to the on-screen User Guide. Sony has  
combined leading-edge technology in audio, video, computing, and communications to provide you with a state-of-the-art  
computing experience.  
!
External views illustrated in this manual may look slightly different from those of your computer.  
How to find specifications  
Some features, options, and supplied items may not be available on your computer.  
To find out about the configuration of your computer, visit the VAIO Link web site at http://www.vaio-link.com.  
 
   
Before Use >  
Finding More about Your VAIO Computer  
5
Finding More about Your VAIO Computer  
This section provides support information about your VAIO computer.  
1. Printed Documentation  
Quick Start Guide — An overview of components connection, set-up information, etc.  
Recovery and Troubleshooting Guide  
Regulations, Guarantee, and Service Support  
2. On-screen Documentation  
User Guide (This manual) — Features of your computer and information about solving common problems.  
To view this on-screen guide:  
1
2
3
Click Start  
, All Programs, and VAIO Documentation.  
Open the folder for your language.  
Select the guide you want to read.  
You can manually browse to the user guides by going to Computer > VAIO (C:) (your C drive) > Documentation > Documentation and opening the  
folder for your language.  
Windows Help and Support — A comprehensive resource for practical advice, tutorials, and demonstrations to help you  
learn to use your computer.  
To access Windows Help and Support, click Start and Help and Support, or press and hold the Microsoft Windows  
key and press the F1 key.  
 
     
Before Use >  
Finding More about Your VAIO Computer  
6
3. Support Web Sites  
If you have any problem with the computer, visit the VAIO-Link web site at http://www.vaio-link.com for troubleshooting  
guidance.  
Some other information resources are also available:  
The Club VAIO community at http://club-vaio.com provides the possibility to ask questions to other VAIO users.  
For product information, you can visit our products web site at http://www.vaio.eu/, or our online store at  
In case you need to contact VAIO-Link, have the serial number of your VAIO computer ready at hand. The serial number is  
located on the bottom, the back panel, or inside the battery compartment of your VAIO computer. If you have problems  
locating your serial number, more guidance can be found on the VAIO-Link web site.  
 
 
Before Use >  
Ergonomic Considerations  
7
Ergonomic Considerations  
You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt  
to take account of the following ergonomic considerations for both stationary and portable environments:  
Position of your computer – Place the computer directly in front of you. Keep your forearms horizontal, with your wrists  
in a neutral, comfortable position while using the keyboard or the pointing device. Let your upper arms hang naturally at  
your sides. Take frequent breaks while using your computer. Excessive use of the computer may strain eyes, muscles, or  
tendons.  
Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the  
floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning  
far backwards.  
 
   
Before Use >  
Ergonomic Considerations  
8
Viewing angle of the computer display – Use the display tilting feature to find the best position. You can reduce eye  
strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display  
as well.  
Lighting – Choose a location where windows and lights do not cause glare and reflection on the display. Use indirect  
lighting to avoid bright spots on the display. Proper lighting adds to your comfort and work efficiency.  
Positioning an external display – When using an external display, set the display at a comfortable viewing distance.  
Make sure the display screen is at or slightly below eye level when you are sitting in front of the monitor.  
 
 
Getting Started >  
9
Getting Started  
This section describes how to get started using your VAIO computer.  
Locating Controls and Ports (page 10)  
About the Indicator Lights (page 17)  
Connecting a Power Source (page 18)  
Using the Battery Pack (page 20)  
Shutting Down Your Computer Safely (page 27)  
Using the Power Saving Modes (page 28)  
Updating Your Computer (page 31)  
 
   
Getting Started >  
Locating Controls and Ports  
10  
Locating Controls and Ports  
Take a moment to identify the controls and ports shown on the following pages.  
!
The appearance of your computer may be different from those illustrated in this manual due to variations in specifications. It may also vary in some  
countries or areas.  
 
   
Getting Started >  
Locating Controls and Ports  
11  
Front  
A Built-in MOTION EYE camera (page 38)  
B Built-in MOTION EYE camera indicator (page 17)  
C LCD screen (page 110)  
D Built-in speakers (stereo)  
E Built-in microphone (monaural)  
F Keyboard (page 33)  
G Touch pad (page 35)  
H Right button (page 35)  
I Left button (page 35)  
*
J "Memory Stick Duo" slot (page 39)  
K Media Access indicator (page 17)  
L SD memory card slot (page 47)  
*
Your computer supports only Duo-size "Memory Stick".  
 
 
Getting Started >  
Locating Controls and Ports  
12  
A VAIO button (page 37)  
B ASSIST button (page 37)  
C Num lock indicator (page 17)  
D Caps lock indicator (page 17)  
E Scroll lock indicator (page 17)  
F WIRELESS indicator (page 17)  
G Charge indicator (page 17)  
H Disc drive indicator (page 17)  
I WIRELESS switch (page 53), (page 58), (page 62)  
 
 
Getting Started >  
Locating Controls and Ports  
13  
Back  
A Battery connector (page 20)  
*
B SIM card slot (page 58)  
*
On selected models only.  
 
 
Getting Started >  
Locating Controls and Ports  
14  
Right  
A ExpressCard/34 slot (page 45)  
*
B USB ports (page 81)  
C Network (LAN) port (page 52)  
D Power button/Power indicator (page 17)  
*
Compliant with the USB 2.0 standard and support high-/full-/low- speeds.  
 
 
Getting Started >  
Locating Controls and Ports  
15  
Left  
A DC IN port (page 18)  
B Security slot  
C Air vent  
D Monitor port (page 73)  
E HDMI output port (page 75)  
*
F USB port (page 81)  
G i.LINK 4-pin (S400) port (page 83)  
H Microphone jack (page 80)  
I Headphones jack (page 71)  
*
Compliant with the USB 2.0 standard and supports high-/full-/low- speeds.  
 
 
Getting Started >  
Locating Controls and Ports  
16  
Bottom  
A Air vents  
B Memory module compartment cover (page 97)  
 
 
Getting Started >  
About the Indicator Lights  
17  
About the Indicator Lights  
Your computer is equipped with the following indicator lights:  
Indicator  
Functions  
Power 1  
Illuminates in green while the computer is on, blinks slowly in orange while the computer is in Sleep mode, and  
turns off when the computer is turned off or enters Hibernate mode.  
Illuminates while the battery pack is charging. See Charging the Battery Pack (page 23) for more information.  
Charge  
Media Access  
Illuminates while data access to a memory card, such as "Memory Stick" and an SD memory card, is in  
progress. (Do not place the computer into Sleep mode or turn it off while this indicator light is lit.) When the  
indicator light is unlit, the memory card is not in use.  
Built-in MOTION EYE camera  
Illuminates while the built-in camera is in use.  
Illuminates while data access to the built-in storage device is in progress. Do not place the computer into Sleep  
mode or turn it off while this indicator light is lit.  
Disc drive  
Press the Num Lk key to activate the numeric keypad. Press it a second time to deactivate the numeric keypad.  
The numeric keypad is not active when the indicator light is unlit.  
Num lock  
Caps lock  
Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key  
while the indicator light is lit. Press the key a second time to turn off the indicator light. Normal typing resumes  
when the Caps lock indicator light is turned off.  
Press the Fn+Scr Lk keys to change how you scroll the display. Normal scrolling resumes when the Scroll lock  
indicator light is turned off. The Scr Lk key functions differently depending on the program you are using and  
does not work with all programs.  
Scroll lock  
WIRELESS  
Illuminates while one or more wireless options are enabled.  
 
   
Getting Started >  
Connecting a Power Source  
18  
Connecting a Power Source  
You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer.  
Using the AC Adapter  
While your computer is directly connected to an AC power source and has a battery pack installed, it uses power from the  
AC outlet.  
Use only the supplied AC adapter for your computer.  
To use the AC adapter  
1
2
3
Plug one end of the power cord (1) into the AC adapter (3).  
Plug the other end of the power cord into an AC outlet (2).  
Plug the cable from the AC adapter (3) into the DC IN port (4) on the computer.  
!
The shape of the DC In plug varies depending on the AC adapter.  
 
   
Getting Started >  
Connecting a Power Source  
19  
To disconnect your computer completely from an AC power source, unplug the AC adapter from the AC outlet.  
Make sure that the AC outlet is easily accessible.  
If you do not intend to use your computer for an extended period of time, place the computer into Hibernate mode. See Using Hibernate  
Mode (page 30).  
 
 
Getting Started >  
Using the Battery Pack  
20  
Using the Battery Pack  
The battery pack supplied with your computer is not fully charged at the time of delivery.  
Installing/Removing the Battery Pack  
To install the battery pack  
1
2
Turn off the computer and close the LCD screen lid.  
Slide the battery LOCK switch (1) inward.  
 
       
Getting Started >  
Using the Battery Pack  
21  
3
Slide the battery pack diagonally into the battery compartment until the projection (2) on either side of the battery  
compartment fits into the U-shaped cut (3) on either side of the battery pack.  
4
5
Push the battery pack down into the compartment until it clicks into place.  
Slide the battery LOCK switch outward to secure the battery pack on the computer.  
 
 
Getting Started >  
Using the Battery Pack  
22  
To remove the battery pack  
!
You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack  
while the computer is in Sleep mode.  
1
2
3
Turn off the computer and close the LCD screen lid.  
Slide the battery LOCK switch (1) inward.  
Slide and hold the battery RELEASE latch (2) inward, put your fingertip underneath the tab (3) on the battery pack, and  
lift the battery pack in the direction of the arrow, and then slide it away from the computer.  
!
Certain rechargeable batteries do not meet Sony quality and safety standards. For safety reasons this computer only functions with genuine Sony  
battery packs designed for this model. If an unauthorized battery pack is installed, the battery will not be charged and the computer will not function.  
 
   
Getting Started >  
Using the Battery Pack  
23  
Charging the Battery Pack  
The battery pack supplied with your computer is not fully charged at the time of delivery.  
To charge the battery pack  
1
2
Install the battery pack.  
Connect the computer to a power source with the AC adapter.  
The charge indicator light is on while the battery pack is charging. When the battery pack charges close to the maximum  
charge level you selected, the charge indicator turns off.  
Charge indicator status  
Meaning  
Lit in orange  
The battery pack is charging.  
Blinks along with the green  
power indicator  
The battery pack is running out of power.  
(Normal mode)  
Blinks along with the orange  
power indicator  
The battery pack is running out of power.  
(Sleep mode)  
Blinks fast in orange  
A battery error has occurred due to a failed battery  
pack or an unlocked battery pack.  
!
Charge the battery pack as described in this manual from your first battery charge.  
 
     
Getting Started >  
Using the Battery Pack  
24  
Keep the battery pack in your computer while it is directly connected to an AC power source. The battery pack continues to charge while you are using  
the computer.  
When the battery pack is running out of power and both the charge and power indicator lights blink, you should either connect the AC adapter to  
recharge the battery pack or shut down your computer and install a fully charged battery pack.  
Your computer is supplied with a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack does not affect  
the life of battery.  
While some software applications or peripheral devices are in use, your computer may not enter Hibernate mode even when the remaining battery life  
becomes short. To avoid loss of data while the computer is running on the battery, you should save your data frequently and manually activate a power  
management mode, such as Sleep or Hibernate.  
If the battery pack runs out of power while the computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is  
impossible. To avoid loss of data, you should save your data frequently.  
 
 
Getting Started >  
Using the Battery Pack  
25  
Checking the Battery Charge Capacity  
The battery charge capacity gradually decreases as the number of battery charging increases or the duration of use of the  
battery pack extends. To get the most out of the battery pack, check the battery charge capacity and change the battery  
settings.  
To check the battery charge capacity  
1
2
Click Start, All Programs, and VAIO Control Center.  
Click Power Management and Battery.  
Additionally, you can enable the battery care function to extend the life of the battery pack.  
 
 
Getting Started >  
Using the Battery Pack  
26  
Extending the Battery Life  
When your computer is running on battery power, you can extend the battery life using the following methods.  
Decrease the LCD brightness of your computer screen.  
Use the power saving mode. See Using the Power Saving Modes (page 28) for more information.  
Change the power saving settings on the Power Options. See Using the VAIO Power Management (page 95) for more  
information.  
Set the wallpaper in Long Battery Life Wallpaper Setting as your desktop background with the VAIO Control Center.  
 
 
Getting Started >  
Shutting Down Your Computer Safely  
27  
Shutting Down Your Computer Safely  
To avoid losing unsaved data, be sure to shut down your computer properly, as described below.  
To shut down your computer  
1
2
3
Turn off any peripherals connected to the computer.  
Click Start and the Shut down button.  
Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off  
automatically.  
The power indicator light turns off.  
 
   
Getting Started >  
Using the Power Saving Modes  
28  
Using the Power Saving Modes  
You can take advantage of the power management settings to conserve battery life. In addition to the normal operating mode,  
your computer has two distinct power saving modes to suit your preference: Sleep and Hibernate.  
!
If you do not intend to use your computer for an extended period of time while it is disconnected from an AC power source, place the computer into  
Hibernate mode or turn it off.  
If the battery pack runs out of power while your computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is  
impossible. To avoid loss of data, you should save your data frequently.  
Mode  
Description  
Normal mode  
This is the normal state of your computer while it is in use. The green power indicator light is lit while the  
computer is in this mode.  
Sleep mode  
Sleep mode turns off the LCD screen and places the built-in storage device(s) and the CPU into a low power  
consumption mode. The orange power indicator light blinks slowly while your computer is in this mode. Your  
computer comes out of Sleep mode quicker than out of Hibernate mode. However, Sleep mode uses more  
power than Hibernate mode.  
Hibernate mode  
While your computer is in Hibernate mode, the state of the system is saved on the built-in storage device(s) and  
power is turned off. Even when the battery pack runs out of power, no data will be lost. The power indicator light  
is unlit while your computer is in this mode.  
 
     
Getting Started >  
Using the Power Saving Modes  
29  
Using Sleep Mode  
To activate Sleep mode  
Click Start, the arrow  
next to the Shut down button, and Sleep.  
To return to Normal mode  
Press any key.  
Press the power button on your computer.  
!
If you press and hold the power button for more than four seconds, your computer will turn off automatically. You will lose all unsaved data.  
 
 
Getting Started >  
Using the Power Saving Modes  
30  
Using Hibernate Mode  
To activate Hibernate mode  
Press the Fn+F12 keys.  
Alternatively, you can click Start, the arrow next to the Shut down button, and Hibernate.  
!
Do not move your computer before its power indicator light turns off.  
To return to Normal mode  
Press the power button.  
!
If you press and hold the power button for more than four seconds, your computer will turn off automatically.  
 
     
Getting Started >  
Updating Your Computer  
31  
Updating Your Computer  
Be sure to update your VAIO computer with the following software applications so that the computer can run more efficiently  
and securely.  
The VAIO Update automatically notifies you of new updates for enhancing your computer's performance available on the  
Internet, and downloads and installs them on the computer.  
Windows Update  
Click Start, All Programs, and Windows Update and then follow the on-screen instructions.  
VAIO Update 5  
Click Start, All Programs, and VAIO Update 5 and then follow the on-screen instructions.  
!
Your computer must be connected to the Internet to download the updates.  
 
     
Using Your VAIO Computer >  
32  
Using Your VAIO Computer  
This section describes how to get the most out of using your VAIO computer.  
Using the Keyboard (page 33)  
Using the Touch Pad (page 35)  
Using Special-function Buttons (page 37)  
Using the Built-in Camera (page 38)  
Using "Memory Stick" (page 39)  
Using Other Modules / Memory Cards (page 45)  
Using the Internet (page 51)  
Using the Network (LAN) (page 52)  
Using the Wireless LAN (page 53)  
Using the Wireless WAN (page 58)  
Using the Bluetooth Function (page 62)  
 
   
Using Your VAIO Computer >  
Using the Keyboard  
33  
Using the Keyboard  
Your keyboard has additional keys that perform model-specific tasks.  
Combinations and Functions with the Fn Key  
Some keyboard functions can be used only after the operating system is finished launching.  
Combination/Feature  
Fn + % (F2): muting  
Function  
Turns on and off the built-in speakers or the headphones.  
Fn + 2 (F3/F4): volume control  
Changes the volume level.  
To increase the volume, press the Fn+F4 keys and then the M or , key, or keep pressing the  
Fn+F4 keys.  
To decrease the volume, press the Fn+F3 keys and then the m or < key, or keep pressing the  
Fn+F3 keys.  
Fn + 8 (F5/F6): brightness control  
Changes the LCD brightness of your computer screen.  
To increase lighting intensity, keep pressing the Fn+F6 keys or press the Fn+F6 keys and then  
the M or , key.  
To decrease lighting intensity, keep pressing the Fn+F5 keys or press the Fn+F5 keys and then  
the m or < key.  
Switches the display output between your computer screen, an external display, simultaneous  
output to both, and multiple displays with both that function as a single desktop. Press the Enter  
key to select the display output.  
Fn +  
/T (F7): display output  
!
If you disconnect a display cable from your computer while an external display is selected as the display  
output destination, the computer screen goes blank. In such a case, press the F7 key twice while holding  
down the Fn key, and then press the Enter key to switch the display output to the computer screen.  
Multiple displays may not be supported depending on the operating system on your computer.  
 
       
Using Your VAIO Computer >  
Using the Keyboard  
34  
Combination/Feature  
Function  
Changes the size of an image or a document displayed on some software.  
To make the view look smaller and further away (zoom out), press the Fn+F9 keys.  
To make the view look bigger and closer (zoom in), press the Fn+F10 keys.  
See the help file included with the VAIO Control Center for more information.  
Fn +  
/
(F9/F10): zooming  
Provides the lowest level of power consumption. When you execute this command, the states  
of the system and the connected peripheral devices are saved to the built-in storage device and  
the system power is turned off. To return the system to its original state, use the power button  
to turn on the power.  
Fn +  
(F12): hibernation  
For details on power management, see Using the Power Saving Modes (page 28).  
 
 
Using Your VAIO Computer >  
Using the Touch Pad  
35  
Using the Touch Pad  
You can point to, select, drag, and scroll objects on the screen using the touch pad.  
Action  
Point  
Description  
Slide your finger on the touch pad (1) to place the pointer (2) on an item or object.  
Press the left button (3) once.  
Click  
Double-click  
Right-click  
Drag  
Press the left button twice in a row.  
Press the right button (4) once. With many applications, this action displays a context-sensitive shortcut menu (if any).  
Slide your finger on the touch pad while pressing the left button.  
Scroll  
Slide your finger along the right edge of the touch pad to scroll vertically. Slide your finger along the bottom edge to scroll  
horizontally. Once vertical or horizontal scrolling is engaged, you can move your finger in circles on the touch pad to  
keep scrolling without taking the finger off the touch pad (the scroll function is available only with applications that  
support a touch pad scroll feature).  
Flick  
Slide two fingers linearly in quick motion on the touch pad. On web browser software or image viewer software, you can  
flick left to move backward and flick right to move forward.  
Pinch  
With some software applications, you can pinch on the touch pad with two fingers for zooming. Pinch open to zoom in  
or pinch close to zoom out.  
You can disable/enable the touch pad while a mouse is connected to your computer. To change the touch pad settings, use the VAIO Control Center.  
 
     
Using Your VAIO Computer >  
Using the Touch Pad  
36  
!
Be sure to connect a mouse before disabling the touch pad. If you disable the touch pad before connecting a mouse, you will be able to use only the  
keyboard for pointer operations.  
 
 
Using Your VAIO Computer >  
Using Special-function Buttons  
37  
Using Special-function Buttons  
Your computer is equipped with special buttons to help you use specific functions of the computer.  
Special-function button  
Functions  
Launches the VAIO Care while the computer is in Normal mode or Sleep mode.  
While the computer is off or in Hibernate mode, the ASSIST button launches the VAIO Recovery Center.  
ASSIST button  
Launches the Media Gallery or turns the volume on and off, depending on your model.  
VAIO button  
 
     
Using Your VAIO Computer >  
Using the Built-in Camera  
38  
Using the Built-in Camera  
Your computer is equipped with a built-in MOTION EYE camera.  
With the preinstalled image capture software, you can perform the following:  
Capture still images and movies  
Sense and capture object movements for monitoring purposes  
Edit captured data  
Turning on the computer activates the built-in camera.  
Video conferences are possible with the appropriate software.  
!
Launching or exiting your instant messaging or video editing software does not activate or deactivate the built-in camera.  
Do not place your computer into Sleep or Hibernate mode while you are using the built-in camera.  
To use the preinstalled image capture software  
1
2
Click Start, All Programs, ArcSoft WebCam Companion 3, and WebCam Companion 3.  
Click your desired icon in the main window.  
For detailed information on how to use the software, see the help file included with the software.  
When capturing an image or a movie in a dark place, click the Capture icon in the main window, and then click the WebCam Settings icon and select  
the low light or low light compensation option in the properties window.  
 
     
Using Your VAIO Computer >  
Using "Memory Stick"  
39  
Using "Memory Stick"  
"Memory Stick" is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing  
digital data with compatible products, such as digital cameras, mobile phones, and other devices. Because it is removable,  
it can be used for external data storage.  
Before You Use "Memory Stick"  
The "Memory Stick Duo" slot on your computer can accommodate the following sizes and types of media:  
"Memory Stick Duo"  
"Memory Stick PRO Duo"  
"Memory Stick PRO-HG Duo"  
!
Your computer supports only Duo-size "Memory stick", and does not support standard-size "Memory Stick".  
For the latest information about "Memory Stick", visit [memorystick.com] at http://www.memorystick.com/en/.  
 
     
Using Your VAIO Computer >  
Using "Memory Stick"  
40  
Inserting and Removing "Memory Stick"  
To insert "Memory Stick"  
1
2
3
Locate the "Memory Stick Duo" slot.  
Hold "Memory Stick" with the arrow facing upward and pointing toward the slot.  
Carefully slide "Memory Stick" into the slot until it clicks into place.  
Do not force the media into the slot.  
If "Memory Stick" does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.  
"Memory Stick" is automatically detected by your system and the contents of "Memory Stick" are displayed. If nothing appears on the desktop, click  
Start, Computer, and double-click the "Memory Stick" icon.  
The "Memory Stick" icon will appear in the Computer window after you insert "Memory Stick" into the slot.  
 
 
Using Your VAIO Computer >  
Using "Memory Stick"  
41  
!
Before using "Memory Stick Micro" ("M2"), be sure to insert it into an "M2" Duo adaptor. If you insert the media directly into the "Memory Stick Duo"  
slot without the adaptor, you may not be able to remove it from the slot.  
To remove "Memory Stick"  
!
Do not remove "Memory Stick" while the Media Access indicator light is lit. If you do, you may lose data. Large volumes of data may take time to load,  
so make sure the indicator light is unlit before removing "Memory Stick".  
1
2
3
Locate the "Memory Stick Duo" slot.  
Check that the Media Access indicator light is unlit.  
Push in "Memory Stick" toward the computer and release.  
"Memory Stick" ejects.  
4
Pull "Memory Stick" out of the slot.  
!
Be sure to remove "Memory Stick" gently, or it may pop out unexpectedly.  
 
 
Using Your VAIO Computer >  
Using "Memory Stick"  
42  
Formatting "Memory Stick"  
To format "Memory Stick"  
"Memory Stick" is formatted by default and is ready for use.  
If you want to reformat the media with your computer, follow these steps.  
!
Be sure to use the device that is designed to format the media and supports "Memory Stick" when formatting the media.  
Formatting "Memory Stick" erases the entire data stored on the media. Before formatting the media, make sure that it does not contain your valuable  
data.  
Do not remove "Memory Stick" from the slot while formatting. This could cause a malfunction.  
Locate the "Memory Stick Duo" slot.  
1
2
3
4
5
Carefully slide "Memory Stick" into the slot until it clicks into place.  
Click Start and Computer.  
Right-click the "Memory Stick" icon and select Format.  
Click Restore device defaults.  
!
The size of the allocation unit and file system may change.  
Do not select NTFS from the File system drop-down list as it may cause a malfunction.  
The formatting process will be completed more quickly if you select Quick Format in Format options.  
 
   
Using Your VAIO Computer >  
Using "Memory Stick"  
43  
6
Click Start.  
7
Follow the on-screen instructions.  
!
It may take time to format "Memory Stick" depending on the media type.  
 
 
Using Your VAIO Computer >  
Using "Memory Stick"  
44  
Notes on Using "Memory Stick"  
Your computer has been tested and found compatible with Sony branded "Memory Stick" with capacity of up to 32 GB  
that are available as of September 2009. However, not all "Memory Stick" are guaranteed of compatibility.  
Be sure to hold "Memory Stick" with the arrow pointing in the correct direction as you insert it into the slot. To avoid  
damaging your computer or the media, do not force "Memory Stick" into the slot if you cannot insert it smoothly.  
Use care when inserting or removing "Memory Stick" from the slot. Do not force it in or out of the slot.  
Inserting "Memory Stick" with multiple conversion adaptors is not guaranteed of compatibility.  
"MagicGate" is the general name of the copyright protection technology developed by Sony. Use "Memory Stick" with the  
"MagicGate" logo to take advantage of this technology.  
Except for your personal use, it is against the copyright law to use any audio and/or image data you recorded without prior  
consent from the respective copyright holders. Accordingly, "Memory Stick" with such copyrighted data can be used only  
within the law.  
Do not insert more than one "Memory Stick" into the slot. Improper insertion of the media may damage both your  
computer and the media.  
 
 
Using Your VAIO Computer >  
Using Other Modules / Memory Cards  
45  
Using Other Modules / Memory Cards  
Using the ExpressCard Module  
Your computer is equipped with an ExpressCard/34 slot* for transferring data among digital cameras, camcorders, music  
players, and other audio/video devices. This slot can only accommodate an ExpressCard/34 (34 mm wide) module*.  
*
Referred to as the ExpressCard slot and the ExpressCard module in this manual.  
To insert an ExpressCard module  
1
2
Locate the ExpressCard slot.  
Carefully slide the ExpressCard module into the slot until it clicks into place.  
Do not force it into the slot.  
If the module does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.  
Make sure you use the most recent driver software provided by the ExpressCard module manufacturer.  
 
     
Using Your VAIO Computer >  
Using Other Modules / Memory Cards  
46  
To remove an ExpressCard module  
You can skip steps 1 to 4 when:  
- your computer is off.  
- the Safely Remove Hardware icon is not displayed on the taskbar.  
- the hardware you want to unplug is not displayed in the Safely Remove Hardware window.  
1
2
3
4
5
6
Locate the ExpressCard slot.  
Click the Safely Remove Hardware and Eject Media icon on the taskbar.  
Select the hardware you want to unplug.  
Follow the on-screen instructions for removing the ExpressCard module.  
Push in the ExpressCard module toward the computer so that the module pops out.  
Gently take hold of the ExpressCard module and pull it out of the slot.  
 
 
Using Your VAIO Computer >  
Using Other Modules / Memory Cards  
47  
Using the SD Memory Card  
Your computer is equipped with an SD memory card slot. You can use this slot to transfer data among digital cameras,  
camcorders, music players, and other audio/video devices.  
Before you use the SD memory card  
The SD memory card slot on your computer can accommodate the following memory cards:  
SD memory card  
SDHC memory card  
For the latest information on compatible memory cards, see Finding More about Your VAIO Computer (page 5) to visit the  
appropriate support web site.  
 
   
Using Your VAIO Computer >  
Using Other Modules / Memory Cards  
48  
To insert an SD memory card  
1
2
3
Locate the SD memory card slot.  
Hold the SD memory card with the arrow facing upward and pointing toward the slot.  
Carefully slide the SD memory card into the slot until it clicks into place.  
Do not force the card into the slot.  
The SD memory card icon will appear in the Computer window after you insert the card into the slot.  
 
 
Using Your VAIO Computer >  
Using Other Modules / Memory Cards  
49  
To remove an SD memory card  
1
2
3
Locate the SD memory card slot.  
Check that the Media Access indicator light is unlit.  
Push in the SD memory card toward the computer and release.  
The SD memory card ejects.  
4
Pull the SD memory card out of the slot.  
 
 
Using Your VAIO Computer >  
Using Other Modules / Memory Cards  
50  
Notes on Using Memory Cards  
General notes on using the memory card  
Be sure to use memory cards that are compliant with the standards supported by your computer.  
Be sure to hold the memory card with the arrow pointing in the correct direction as you insert it into the slot. To avoid  
damaging your computer or the media, do not force the memory card into the slot if you cannot insert it smoothly.  
Use care when inserting or removing the memory card from the slot. Do not force it in or out of the slot.  
Do not remove the memory card while the media access indicator light is lit. If you do, you may lose data.  
Do not attempt to insert a memory card or memory card adaptor of a different type into the memory card slot. An  
incompatible memory card or memory card adaptor may cause difficulty in removing from the slot and can cause damage  
to your computer.  
Notes on using the SD memory card  
Your computer has been tested and found compatible only with major memory cards available as of September 2009.  
However, not all memory cards are guaranteed of compatibility.  
SD memory cards with capacity of up to 2 GB and SDHC memory cards with capacity of up to 32 GB have been tested  
and found compatible with your computer.  
The SD memory card slot on your computer does not support the high-speed data transfer feature of the SD memory  
card and the SDHC memory card.  
 
 
Using Your VAIO Computer >  
Using the Internet  
51  
Using the Internet  
Before using the Internet, you need to sign up with an Internet Service Provider (ISP) and set up devices required for  
connecting your computer to the Internet.  
The following types of Internet connection services may be available from your ISP:  
Fiber to the Home (FTTH)  
Digital Subscriber Line (DSL)  
Cable modem  
Satellite  
Dial-up  
For detailed information on devices required for Internet access and how to connect your computer to the Internet, ask your  
ISP.  
To connect your computer to the Internet using the wireless LAN function, you need to set up the wireless LAN network. See Using the  
Wireless LAN (page 53) for more information.  
!
When you connect your computer to the Internet, be sure to take appropriate security measures to protect the computer against online threats.  
Depending on the service contract with your ISP, you may need to connect an external modem device, for example a USB telephone modem, a DSL  
modem, or a cable modem, to your computer. For detailed instructions on connection setups and modem configuration, see the manual that came with  
your modem.  
 
   
Using Your VAIO Computer >  
Using the Network (LAN)  
52  
Using the Network (LAN)  
You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T type networks with a LAN cable. Connect one end  
of a LAN cable (not supplied) to the network (LAN) port on the computer and the other end to your network. For detailed  
settings and devices required for LAN access, ask your network administrator.  
You can connect your computer to any network without changing the default settings.  
!
Do not plug a telephone cable into the network (LAN) port on your computer.  
If the network (LAN) port is connected to one of the telephone lines mentioned below, high electric current to the port may cause damage, overheating,  
or fire.  
- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)  
- Public telephone subscriber line  
- Private branch exchange (PBX)  
 
     
Using Your VAIO Computer >  
Using the Wireless LAN  
53  
Using the Wireless LAN  
The Wireless LAN (WLAN) allows your computer to connect to a network through a wireless connection.  
The WLAN uses the following IEEE 802.11a/b/g/n standard, which specifies the type of technology used.  
See the specifications to find out about the configuration of your computer.  
WLAN standard  
IEEE 802.11a  
Frequency band  
5 GHz  
Remarks  
-
IEEE 802.11b/g  
2.4 GHz  
The IEEE 802.11g standard provides higher-  
speed communications than the IEEE 802.11b  
standard.  
IEEE 802.11n  
5 GHz/2.4 GHz  
On models compliant with the IEEE 802.11b/g/n  
standard, only the 2.4 GHz band can be used.  
 
     
Using Your VAIO Computer >  
Using the Wireless LAN  
54  
Notes on Using the Wireless LAN Function  
General notes on using the wireless LAN function  
In some countries or areas, using WLAN products may be restricted by the local regulations (e.g. limited number of  
channels). Before activating the WLAN function, read the wireless LAN regulations guide carefully.  
The IEEE 802.11a standard and the IEEE 802.11n standard are not available on ad-hoc networks.  
The 2.4 GHz band used by wireless LAN compatible devices is also used by other various devices. Although technologies  
to minimize interference from other devices that use the same band are employed on wireless LAN compatible devices,  
such interference may cause lower communication speed, narrower communication range, or broken wireless  
connections.  
The communication speed and range may vary depending on the following conditions:  
Distance between communication devices  
Existence of obstacles between devices  
Device configuration  
Radio conditions  
Ambient environment that includes existence of walls and materials of such walls  
Software in use  
Communications may be cut off depending on radio conditions.  
Actual communication speed may not be as fast as the one displayed on your computer.  
Deploying WLAN products compliant with different standards that use the same band on the same wireless network may  
reduce the communication speed due to radio interference. Taking this into consideration, WLAN products are designed  
to reduce the communication speed to ensure communications with another WLAN product if it is compliant with a  
different standard that uses the same band. When the communication speed is not as fast as expected, changing the  
wireless channel on the access point may increase the communication speed.  
 
 
Using Your VAIO Computer >  
Using the Wireless LAN  
55  
Note on the data encryption  
The WLAN standard includes the encryption methods: Wired Equivalent Privacy (WEP), which is a security protocol, Wi-Fi  
Protected Access 2 (WPA2), and Wi-Fi Protected Access (WPA). Proposed jointly by the IEEE and Wi-Fi Alliance, both WPA2  
and WPA are specifications of standards based on interoperable security enhancements that increase the level of data  
protection and access control for existing Wi-Fi networks. WPA is designed to be forward compatible with the IEEE 802.11i  
specification. It utilizes the enhanced data encryption Temporal Key Integrity Protocol (TKIP) in addition to user authentication  
using 802.1X and Extensible Authentication Protocol (EAP). Data encryption protects the vulnerable wireless link between  
clients and access points. Besides that, there are other typical LAN security mechanisms to ensure privacy, such as:  
password protection, end-to-end encryption, virtual private networks, and authentication. WPA2, the second generation of  
WPA, provides stronger data protection and network access control and is also designed to secure all versions of 802.11  
devices, including 802.11b, 802.11a, 802.11g, and 802.11n standards, multi-band and multi-mode. In addition, based on the  
ratified IEEE 802.11i standard, WPA2 provides government grade security by implementing the National Institute of  
Standards and Technology (NIST) FIPS 140-2 compliant AES encryption algorithm and 802.1X-based authentication. WPA2  
is backward compatible with WPA.  
 
 
Using Your VAIO Computer >  
Using the Wireless LAN  
56  
Starting Wireless LAN Communications  
You first need to establish wireless LAN communications between your computer and an access point (not supplied). See  
Windows Help and Support for more information.  
!
For details on how to select the channel that will be used by the access point, see the manual that came with your access point.  
To start wireless LAN communications  
1
Make sure an access point is set up.  
See the manual that came with your access point for more information.  
2
3
4
Turn on the WIRELESS switch.  
Click the VAIO Smart Network icon on the taskbar.  
Click the switch next to your desired wireless option(s) to toggle it to On in the VAIO Smart Network window.  
Make sure the WIRELESS indicator light turns on.  
5
6
Click  
or  
on the taskbar.  
Select the desired access point and click Connect.  
For WPA-PSK or WPA2-PSK authentication, you must enter a passphrase. The passphrase is case sensitive and must be a text string between 8 and  
63 characters in length or a hexadecimal string of 64 characters.  
 
 
Using Your VAIO Computer >  
Using the Wireless LAN  
57  
Stopping Wireless LAN Communications  
To stop wireless LAN communications  
Click the switch next to Wireless LAN to toggle it to Off in the VAIO Smart Network window.  
!
Turning off the wireless LAN function while accessing remote documents, files, or resources may result in data loss.  
 
 
Using Your VAIO Computer >  
Using the Wireless WAN  
58  
Using the Wireless WAN  
Using the wireless WAN (WWAN) allows your computer to connect to the Internet through the wireless network wherever  
there is the mobile phone coverage.  
The WWAN may not be available in some countries or areas. See Wireless WAN Regulations Guide in Regulations,  
Guarantee, and Service Support to find out in which countries or areas the WWAN is available.  
Some features and options in this section may not be available on your computer.  
See the specifications to find out about the configuration of your computer.  
 
     
Using Your VAIO Computer >  
Using the Wireless WAN  
59  
Inserting a SIM Card  
To use the wireless WAN function, you first need to insert a SIM card into the SIM card slot on your computer. Your SIM card  
is contained within a base plate, about the size of a credit card.  
Depending on your country and model, you might receive an offer from the VAIO selected telecom operator. In that case the SIM card is either in the  
operator SIM pack inside the carton box or already inserted in the SIM card slot. If the SIM card is not provided with your computer, you can purchase  
one from your preferred telecom operator.  
To insert a SIM card  
1
2
Turn off your computer.  
Remove the battery pack from the computer.  
For detailed instructions, see To remove the battery pack (page 22).  
3
Remove the SIM card (1) by pushing it out from the base plate.  
 
   
Using Your VAIO Computer >  
Using the Wireless WAN  
60  
4
Insert the SIM card into the SIM card slot with its printed circuit side up.  
!
Do not touch the printed circuit on the SIM card. Be sure to hold your computer firmly before inserting or removing the card.  
Do not damage the SIM card in any way, either by bending or exerting pressure on the card.  
5
Reinstall the battery pack.  
!
Make sure the battery pack is installed properly.  
 
 
Using Your VAIO Computer >  
Using the Wireless WAN  
61  
Starting the Wireless WAN Communications  
To start the wireless WAN communications  
1
2
3
4
5
Turn on the WIRELESS switch.  
Click the VAIO Smart Network icon on the taskbar.  
Click the switch next to Wireless WAN to toggle it to On in the VAIO Smart Network window.  
Enter your PIN code when prompted.  
If requested, enter the APN information of your telecom operator.  
For more information on how to use the wireless WAN function, see the help file included with the VAIO Smart Network  
software or your telecom operator's documentation.  
 
 
Using Your VAIO Computer >  
Using the Bluetooth Function  
62  
Using the Bluetooth Function  
You can establish wireless communications between your computer and other Bluetooth® devices such as another computer  
or a mobile phone. You can transfer data between these devices without cables at a range of up to 10 meters in an open area.  
Bluetooth Security  
The Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to  
communicate. With the authentication function, you can prevent any anonymous Bluetooth devices from accessing your  
computer.  
The first time two Bluetooth devices communicate, a common passkey (a password required for authentication) should be  
determined for both devices to be registered. Once a device is registered, there is no need to re-enter the passkey.  
The passkey can be different each time, but must be the same at both ends.  
For certain devices, such as a mouse, no passkey can be entered.  
 
     
Using Your VAIO Computer >  
Using the Bluetooth Function  
63  
Communicating with Another Bluetooth Device  
You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a  
mouse, or a digital camera without the use of any cables.  
 
 
Using Your VAIO Computer >  
Using the Bluetooth Function  
64  
To communicate with another Bluetooth device  
To communicate with another Bluetooth device, you first need to set up the Bluetooth function. For setting up and using the  
Bluetooth function, search Windows Help and Support for Bluetooth information.  
1
2
3
Turn on the WIRELESS switch.  
Click the VAIO Smart Network icon on the taskbar.  
Click the switch next to Bluetooth to toggle it to On in the VAIO Smart Network window.  
Make sure the WIRELESS indicator light turns on.  
 
 
Using Your VAIO Computer >  
Using the Bluetooth Function  
65  
Stopping Bluetooth Communications  
To stop Bluetooth communications  
1
2
Turn off the Bluetooth device that is communicating with your computer.  
Click the switch next to Bluetooth to toggle it to Off in the VAIO Smart Network window.  
 
 
Using Your VAIO Computer >  
Using the Bluetooth Function  
66  
Notes on Using the Bluetooth Function  
The data transfer rate varies, depending on the following conditions:  
Obstacles, such as walls, located between devices  
Distance between devices  
Material used in walls  
Proximity to microwaves and cordless telephones  
Radio frequency interference and other environmental conditions  
Device configuration  
Type of software application  
Type of operating system  
Use of both wireless LAN and Bluetooth functions at the same time on your computer  
Size of file being exchanged  
Large files may occasionally be corrupted during continuous transfer due to limitations of the Bluetooth standard and  
electromagnetic interference in the environment.  
All Bluetooth devices must be certified to make sure that the applicable standard requirements are maintained. Even if  
standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange may  
not be possible in all situations.  
Video and audio may not be synchronized if you play videos on your computer with audio output from a connected  
Bluetooth device. This is a frequent occurrence with Bluetooth technology and is not a malfunction.  
 
 
Using Your VAIO Computer >  
Using the Bluetooth Function  
67  
The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth  
devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous  
use of the Bluetooth function and wireless communication devices, however, may cause radio interference and result in  
reduced communication speeds and distances than the standard values.  
Read the Bluetooth regulations guide before using the Bluetooth function.  
The Bluetooth function may not work with other devices, depending on the manufacturer or the software version employed  
by the manufacturer.  
Connecting multiple Bluetooth devices to your computer may cause channel congestion, resulting in poor performance  
of the devices. This is normal with Bluetooth technology and is not a malfunction.  
 
 
Using Peripheral Devices >  
68  
Using Peripheral Devices  
You can add functionality to your VAIO computer by using the various ports on the computer.  
Connecting an Optical Disc Drive (page 69)  
Connecting External Speakers or Headphones (page 71)  
Connecting an External Display (page 72)  
Selecting Display Modes (page 77)  
Using the Multiple Monitors Function (page 78)  
Connecting an External Microphone (page 80)  
Connecting a USB Device (page 81)  
Connecting an i.LINK Device (page 83)  
 
   
Using Peripheral Devices >  
Connecting an Optical Disc Drive  
69  
Connecting an Optical Disc Drive  
To use optical disc media with your computer, connect an external optical disc drive (not supplied) to your computer.  
Connecting an Optical Disc Drive  
!
Be sure to connect an external optical disc drive to your computer before launching any preinstalled disc operation program.  
Be sure to connect an external optical disc drive to an AC power source before using the drive. Your computer only supports optical disc drives that  
run on the power directly supplied through an AC power source.  
 
   
Using Peripheral Devices >  
Connecting an Optical Disc Drive  
70  
To connect an optical disc drive  
1
Connect your external optical disc drive to an AC outlet (1).  
2
3
Choose the USB port (2) you prefer to use.  
Plug one end of a USB cable (3) into the USB port, and the other end to the optical disc drive.  
See the manual that came with your external optical disc drive for detailed instructions on connecting the USB cable to the drive.  
Disconnecting the drive while the computer is in a power saving mode (Sleep or Hibernate) may cause the computer to malfunction.  
 
 
Using Peripheral Devices >  
Connecting External Speakers or Headphones  
71  
Connecting External Speakers or Headphones  
You can connect external sound output devices (not supplied), such as speakers or headphones, to your computer.  
To connect external speakers  
Make sure your speakers are designed for computer use.  
!
Turn down the volume of the speakers before you turn them on.  
Connect external speakers (1) to the headphones jack (2) i with a speaker cable (3) (not supplied).  
 
     
Using Peripheral Devices >  
Connecting an External Display  
72  
Connecting an External Display  
Some features and options in this section may not be available on your computer.  
 
   
Using Peripheral Devices >  
Connecting an External Display  
73  
Connecting a Computer Display or a Projector  
You can connect an external display, such as a computer display or a projector, to your computer.  
To connect a computer display or a projector  
1
2
Plug the power cord (1) of your external display or the projector into the AC outlet.  
Connect the external display or the projector to the monitor port (2) on the computer with a display cable (3).  
If necessary, connect the headphones jack on the projector and the headphones jack (4) i on the computer with a speaker cable (5).  
 
   
Using Peripheral Devices >  
Connecting an External Display  
74  
!
Your computer is compliant with the HDCP standard and capable of encrypting the transmission channel of digital video signals for the purpose of  
copyright protection, which enables you to play and view a wide variety of copyright protected and high-quality content. To view the copyright protected  
content, connect an HDCP-compliant monitor to the HDMI output port on your computer. If your computer has a non-compliant monitor connected,  
you will not be able to play or view any copyright protected content.  
If the external computer display is equipped with an HDMI input port, plug one end of an HDMI cable into the HDMI output port on the computer and  
the other end into the HDMI input port on the computer display.  
If your computer is equipped with the HDMI output port, use an HDMI to DVI-D adapter to connect a TFT/DVI monitor.  
The HDMI cable carries both video and audio signals.  
 
 
Using Peripheral Devices >  
Connecting an External Display  
75  
Connecting a TV with an HDMI Input Port  
You can connect a TV with an HDMI input port to your computer.  
To connect a TV to your computer  
!
To hear sound from the device connected to the HDMI output port, you need to change the device for sound output. For detailed instructions, see How  
do I change the sound output device? (page 153).  
1
2
3
4
Plug the power cord of your TV (1) into an AC outlet.  
Plug one end of an HDMI cable (2) to the HDMI output port (3) on the computer and the other end to the TV.  
Switch the input channel of the TV to external input.  
Set up the TV configuration system.  
!
If a device driver other than the one provided by Sony is used, the image will not be displayed and the audio will not be heard. Always use the device  
driver provided by Sony for updates.  
 
   
Using Peripheral Devices >  
Connecting an External Display  
76  
See the manual that came with your TV for more information on installation and use.  
The HDMI cable carries both video and audio signals.  
To connect a high-quality digital sound output device between your computer and a TV  
You can connect a high-quality home theater receiver or other surround sound decoder devices between your computer and  
TV using an HDMI connection.  
!
Before connecting the device to the computer, make sure the HDMI connection has been set up between the TV and the home theater receiver or  
surround sound decoder device first.  
To hear sound from the device connected to the HDMI output port, you need to change the device for sound output. For detailed instructions, see How  
do I change the sound output device? (page 153).  
1
2
3
Turn on the TV and set its input to the HDMI input.  
Turn on the home theater receiver or surround sound decoder device and set its input to the HDMI input.  
Plug one end of an HDMI cable to the HDMI input port on the home theater receiver or surround sound decoder device  
and the other end to the HDMI output port on the computer.  
You can adjust the screen resolution of the connected TV with your computer. See Why doesn't my screen display a video? (page 144) for more  
information.  
With the HDMI connection, the volume can be adjusted by the connected audio device only. Your computer has no control over the output volume of  
any connected devices.  
 
 
Using Peripheral Devices >  
Selecting Display Modes  
77  
Selecting Display Modes  
When an external display is connected, you can select either your computer screen or the connected display to use as the  
primary monitor.  
You may not be able to display the same content on your computer screen and the external display or projector at the same time, depending on the  
type of your external display or projector.  
Turn on the external display before turning on your computer.  
To select a display mode with the Fn+F7 keys  
You can select a display mode with the Fn+F7 keys. See Combinations and Functions with the Fn Key (page 33) for more  
information.  
To select a display mode from the display settings  
1
2
Right-click on the desktop and select Screen resolution.  
Click the drop-down list next to Multiple Displays, select your desired setting, and then click OK.  
 
     
Using Peripheral Devices >  
Using the Multiple Monitors Function  
78  
Using the Multiple Monitors Function  
The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you  
have an external display connected to the monitor port, your computer screen and the external display can function as a  
single desktop.  
You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window  
or a toolbar, from one display to the other.  
 
   
Using Peripheral Devices >  
Using the Multiple Monitors Function  
79  
To use the Multiple Monitors function  
Your external display may not support the Multiple Monitors function.  
Certain software applications may not be compatible with Multiple Monitors settings.  
Make sure that your computer does not enter Sleep or Hibernate mode while you are using the Multiple Monitors function, or the computer may not  
return to Normal mode.  
If you set different colors on each display, do not expand a single window across two displays, or your software may not work properly.  
Right-click on the desktop and select Screen resolution.  
1
2
Click the drop-down list next to Multiple Displays, select Extend these displays, and then click OK.  
You can set the display colors and resolution for each display and customize the Multiple Monitors function.  
Set fewer colors or a lower resolution for each display.  
 
 
Using Peripheral Devices >  
Connecting an External Microphone  
80  
Connecting an External Microphone  
You can connect an external microphone (not supplied) to your computer.  
To connect an external microphone  
Plug the microphone cable (1) into the microphone jack (2) m.  
Make sure your microphone is designed for computer use.  
 
     
Using Peripheral Devices >  
Connecting a USB Device  
81  
Connecting a USB Device  
You can connect a Universal Serial Bus (USB) device to your computer, such as a mouse, floppy disk drive, speaker, and  
printer.  
To connect a USB device  
1
2
Choose the USB port (1) you prefer to use.  
Plug the USB device cable (2) into the USB port.  
 
     
Using Peripheral Devices >  
Connecting a USB Device  
82  
Notes on connecting a USB device  
You may need to install the driver software supplied with your USB device before use. See the manual that came with the  
USB device for more information.  
Be sure to use a USB printer compatible with your version of Windows to print documents.  
For information on how to remove a USB device, see the manual that came with the device.  
To protect your computer and/or USB devices from damage, observe the following:  
When moving the computer with USB devices connected, avoid exposing the USB ports to shock or impact.  
Do not put the computer into a bag or carrying case when it has USB devices connected.  
 
 
Using Peripheral Devices >  
Connecting an i.LINK Device  
83  
Connecting an i.LINK Device  
Your computer is equipped with an i.LINK port which you can use to connect an i.LINK device, such as a digital video  
camcorder.  
i.LINK is a trademark of Sony Corporation used only to designate that a product contains an IEEE 1394 connection. The procedure to establish an i.LINK  
connection may vary, depending on a software application, an operating system, and a compatible i.LINK device. Not all products with an i.LINK  
connection can communicate with each other. See the manual that came with your compatible i.LINK device for more information on operating  
conditions and proper connection. Before connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk drive, confirm  
their operating system compatibility and required operating conditions.  
Notes on connecting i.LINK devices  
The i.LINK port on your computer does not supply power to an external device. If the external device requires external  
power, be sure to connect it to a power source.  
The i.LINK port supports transfer rates up to 400 Mbps. However, the actual transfer rate depends on the transfer rate of  
the external device.  
The optional i.LINK cables may not be available in some countries or areas.  
An i.LINK connection with other compatible devices is not fully guaranteed.  
The i.LINK connection may not be available depending on the software applications, operating system, and i.LINK-  
compatible devices you use. See the manual that came with your software for more information.  
Check the working conditions and operating system compatibility of i.LINK-compatible PC peripherals (for example, an  
HDD or a CD-RW drive) before you connect them to your computer.  
 
     
Using Peripheral Devices >  
Connecting an i.LINK Device  
84  
Connecting a Digital Video Camcorder  
To connect a digital video camcorder  
Plug one end of an i.LINK cable (1) (not supplied) into the i.LINK port (2) on the computer and the other end into the DV In/  
Out port (3) on the digital video camcorder.  
The connection procedure varies depending on your compatible i.LINK device. See the manual that came with the device for more information.  
You cannot access the contents of "Memory Stick" in the digital video camcorder via an i.LINK connection.  
 
 
Customizing Your VAIO Computer >  
85  
Customizing Your VAIO Computer  
This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn  
how to use and customize the look of your Sony software and utilities.  
Setting the Password (page 86)  
Using Intel VT (page 93)  
Using the VAIO Control Center (page 94)  
Using the VAIO Power Management (page 95)  
 
   
Customizing Your VAIO Computer >  
Setting the Password  
86  
Setting the Password  
Setting the password allows you to protect your computer from unauthorized access by making the user enter the password  
when the computer is turned on or returns to Normal mode from Sleep mode or Hibernate mode.  
!
Do not to forget your password. Write down the password and keep it in a secure place.  
Type of Password  
Description  
Power-on password  
You can use BIOS functions to set two types of passwords:  
- Machine password: Allows users with administrative rights to change all the setup options in the BIOS setup  
screen, as well as to start the computer.  
- User password: Allows the standard users to change some of the BIOS setup options, as well as to start the  
computer. To set the user password, you must first set the machine password.  
Entry of the power-on password will be prompted after the VAIO logo appears to start your computer.  
!
If you forget the machine password, the password needs to be reset and a fee will be charged. To reset the password,  
contact an authorized Sony service/support center. To find the nearest center or agent, see Finding More about Your VAIO  
Computer (page 5).  
You can reset the user password at the BIOS setup screen by entering the machine password.  
Windows password  
Allows users to log onto your computer and protect each user account with its own password.  
Entry of the Windows password will be prompted after you select your user account.  
 
   
Customizing Your VAIO Computer >  
Setting the Password  
87  
Setting the Power-on Password  
To add the power-on password (machine password)  
1
2
Turn on the computer.  
Press the F2 key when the VAIO logo appears.  
The BIOS setup screen appears. If the screen does not appear, restart the computer and press the F2 key several times  
when the VAIO logo appears.  
3
4
Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the  
Enter key.  
On the password entry screen, enter the password twice and press the Enter key.  
The password can be up to 32 alphanumeric characters long (including spaces).  
5
6
7
Select Password when Power On under Security and press the Enter key.  
Change the setting from Disabled to Enabled.  
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.  
At the confirmation prompt, press the Enter key.  
 
 
Customizing Your VAIO Computer >  
Setting the Password  
88  
To add the power-on password (user password)  
!
Make sure you set the machine password before setting the user password.  
1
2
Turn on the computer.  
Press the F2 key when the VAIO logo appears.  
The BIOS setup screen appears. If the screen does not appear, restart the computer and press the F2 key several times  
when the VAIO logo appears.  
3
4
Enter the machine password and press the Enter key.  
Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the  
Enter key.  
5
6
On the password entry screen, enter the password twice and press the Enter key.  
The password can be up to 32 alphanumeric characters long (including spaces).  
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.  
At the confirmation prompt, press the Enter key.  
 
 
Customizing Your VAIO Computer >  
Setting the Password  
89  
To change or remove the power-on password (machine password)  
1
2
Turn on the computer.  
Press the F2 key when the VAIO logo appears.  
The BIOS setup screen appears. If the screen does not appear, restart the computer and press the F2 key several times  
when the VAIO logo appears.  
3
4
Enter the machine password and press the Enter key.  
Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the  
Enter key.  
5
6
On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.  
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter  
key.  
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.  
At the confirmation prompt, press the Enter key.  
 
 
Customizing Your VAIO Computer >  
Setting the Password  
90  
To change or remove the power-on password (user password)  
1
2
Turn on the computer.  
Press the F2 key when the VAIO logo appears.  
The BIOS setup screen appears. If the screen does not appear, restart the computer and press the F2 key several times  
when the VAIO logo appears.  
3
4
Enter the user password and press the Enter key.  
Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the  
Enter key.  
5
6
On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.  
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter  
key.  
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.  
At the confirmation prompt, press the Enter key.  
 
 
Customizing Your VAIO Computer >  
Setting the Password  
91  
Setting the Windows Password  
To add the Windows password  
1
2
3
4
5
6
Click Start and Control Panel.  
Click User Accounts and Family Safety or User Accounts.  
Click User Accounts.  
Click Create a password for your account under Make changes to your account.  
In the New password and Confirm new password fields, enter the password for your account.  
Click Create password.  
See Windows Help and Support for more information on the Windows password.  
To change the Windows password  
1
2
3
4
5
6
7
Click Start and Control Panel.  
Click User Accounts and Family Safety or User Accounts.  
Click User Accounts.  
Click Change your password.  
In the Current password field, enter your current password.  
In the New password and Confirm new password fields, enter a new password.  
Click Change password.  
 
 
Customizing Your VAIO Computer >  
Setting the Password  
92  
To remove the Windows password  
1
2
3
4
5
6
Click Start and Control Panel.  
Click User Accounts and Family Safety or User Accounts.  
Click User Accounts.  
Click Remove your password.  
In the Current password field, enter the current password that you want to remove.  
Click Remove password.  
 
 
Customizing Your VAIO Computer >  
Using Intel(R) VT  
93  
Using Intel(R) VT  
Intel(R) Virtualization Technology (VT) allows you to use hardware virtualization software for enhancing your computer's  
performance.  
!
Intel VT may not be available depending on the CPU installed on your computer.  
For information on virtualization and how to use hardware virtualization software, contact the software publisher.  
To enable Intel VT  
1
2
Turn on your computer.  
Press the F2 key when the VAIO logo appears.  
The BIOS setup screen appears. If the screen does not appear, restart the computer and press the F2 key several times  
when the VAIO logo appears.  
3
4
Press the < or , key to select Advanced.  
Press the M or m key to select Intel(R) Virtualization Technology or Intel(R) VT, press the Enter key, select Enabled,  
and press the Enter key.  
!
If the Advanced tab is not displayed in the BIOS setup window or you cannot select Intel(R) Virtualization Technology, Intel VT is not available on the  
computer.  
5
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.  
At the confirmation prompt, press the Enter key.  
 
   
Customizing Your VAIO Computer >  
Using the VAIO Control Center  
94  
Using the VAIO Control Center  
The VAIO Control Center utility allows you to access system information and to specify preferences for system behavior.  
To use the VAIO Control Center  
1
2
3
Click Start, All Programs, and VAIO Control Center.  
Select your desired control item and change the settings.  
Once finished, click OK.  
The setting of the desired item is changed.  
For more information about each option, see the help file included with the VAIO Control Center.  
Some of the control items will not be visible if you open the VAIO Control Center as a standard user.  
 
   
Customizing Your VAIO Computer >  
Using the VAIO Power Management  
95  
Using the VAIO Power Management  
Power management helps you set up power plans for running on AC or battery power to suit your requirements for power  
consumption.  
The VAIO Power Management function is added to the Windows Power Options. With this software application, you can  
enhance the Windows power management functions to ensure better operation of your computer and longer battery life.  
Selecting a Power Plan  
When you start the computer, a power status icon appears on the taskbar. This icon indicates what kind of power source you  
are currently using. Click this icon to display the window that shows your power status.  
To select a power plan  
1
2
Right-click the power status icon on the taskbar and select Power Options.  
Select your desired power plan.  
To change the power plan settings  
1
2
3
4
Click Change plan settings on the right of your desired power plan in the Power Options window.  
Change the Sleep mode and display settings as needed.  
If you need to change the advanced settings, click Change advanced power settings and go to step 3.  
Otherwise, click Save changes.  
Click the VAIO Power Management tab.  
Change the settings for each item.  
Click OK.  
You can check the current power plan settings with the VAIO Power Management Viewer in the VAIO Control Center.  
 
     
Upgrading Your VAIO Computer >  
96  
Upgrading Your VAIO Computer  
Your VAIO computer and memory modules use high precision components and electronic connectors technology. To avoid  
invalidation of the warranty during your product warranty period, we recommend that:  
You should contact your dealer to install a new memory module.  
You should not install it yourself, if you are not familiar with upgrading memory on a computer.  
You should not touch the connectors or open the memory module compartment cover.  
Contact VAIO-Link if you need assistance.  
The type of module and the amount of memory installed on your computer may differ depending on the model you purchased.  
See the specifications to find out about the configuration of your computer.  
 
   
Upgrading Your VAIO Computer >  
Adding and Removing Memory  
97  
Adding and Removing Memory  
If you want to expand the functionality of your computer, you can increase the amount of memory by installing optional  
memory modules. Before you upgrade your computer's memory, read the notes and procedures in the following pages.  
Notes on adding/removing memory modules  
Be sure to place your computer on a flat surface before adding or removing memory modules.  
Be careful when changing memory. Improper installation of memory modules may cause damage to your system. This  
damage may void your manufacturer's warranty.  
Only use memory modules that are compatible with your computer. If a memory module is not detected by the computer  
or the Windows operating system becomes unstable, contact the sales dealer or the manufacturer of your memory  
module.  
Electrostatic discharge (ESD) can damage electronic components. Before touching a memory module, ensure the  
following:  
The procedures described in this document assume user familiarity with the general terminology associated with  
personal computers and with the safety practice and regulatory compliance requirements for using and modifying  
electronic equipment.  
Turn off your computer and disconnect it from its power sources (battery pack and AC adapter) and from any  
telecommunication links, networks, or modems before you remove any cover or panel from the computer. Failure to  
do so may result in personal injury or equipment damage.  
ESD can damage memory modules and other components. Install the memory module only at an ESD workstation.  
If such a station is not available, do not work in a carpeted area, and do not handle materials that produce or hold  
static electricity (cellophane wrappers, for example). Ground yourself by maintaining contact with an unpainted metal  
portion of the chassis while performing the procedure.  
 
     
Upgrading Your VAIO Computer >  
Adding and Removing Memory  
98  
Do not open the memory module package before you are ready to change the module. The package protects the  
module from ESD.  
Use the special bag supplied with the memory module or wrap the module in aluminum foil to protect it from ESD.  
Introducing any liquids, foreign substances, or objects into the memory module slots or other internal components of your  
computer will result in damage to the computer and any repair costs will not be covered by the warranty.  
Do not place the memory module in a location subject to:  
Heat sources such as radiators or air ducts  
Direct sunlight  
Excessive dust  
Mechanical vibration or shock  
Strong magnets or speakers that are not magnetically shielded  
Ambient temperature of more than 35°C or less than 5°C  
High humidity  
Handle the memory module with care. To avoid injuries to your hands and fingers, do not touch the edges of the  
components and circuit boards inside your computer.  
 
 
Upgrading Your VAIO Computer >  
Adding and Removing Memory  
99  
Removing and Installing a Memory Module  
To change or add a memory module  
1
2
3
4
Shut down the computer and disconnect all peripheral devices.  
Unplug the computer and remove the battery pack.  
Wait about an hour until the computer cools down.  
Unscrew the screws (indicated by the arrows below) on the bottom of the computer and remove the memory module  
compartment cover.  
5
Touch a metal object to discharge static electricity.  
 
 
Upgrading Your VAIO Computer >  
Adding and Removing Memory  
100  
6
Remove the currently installed memory module as follows:  
Pull the latches in the direction of the arrows (1).  
The memory module is released.  
Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2).  
7
Remove the new memory module from its packaging.  
 
 
Upgrading Your VAIO Computer >  
Adding and Removing Memory  
101  
8
Slide the memory module into the memory module slot and push it in until it clicks into place.  
!
Do not touch any components on the motherboard other than the memory module.  
Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open  
slot. Do not force the memory module into the slot in a wrong orientation, as it may cause damage to the slot and the module.  
9
Replace the memory module compartment cover.  
10 Tighten the screws on the bottom of the computer.  
11 Reinstall the battery pack and turn on the computer.  
 
 
Upgrading Your VAIO Computer >  
Adding and Removing Memory  
102  
Viewing the Amount of Memory  
To view the amount of memory  
1
2
3
Turn on the computer.  
Click Start, All Programs, and VAIO Control Center.  
Click System Information and System Information.  
You can view the amount of system memory in the right pane. If the additional memory does not appear, repeat the  
installation procedure and restart the computer.  
 
 
Precautions >  
103  
Precautions  
This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage.  
Safety Information (page 104)  
Care and Maintenance Information (page 107)  
Handling Your Computer (page 108)  
Handling the LCD Screen (page 110)  
Using the Power Source (page 111)  
Handling the Built-in Camera (page 112)  
Handling Discs (page 113)  
Using the Battery Pack (page 114)  
Handling "Memory Stick" (page 115)  
Handling the Built-in Storage Device (page 116)  
 
   
Precautions >  
Safety Information  
104  
Safety Information  
Computer  
Use your computer on a solid, stable surface.  
We advise not to use your computer directly on your lap. The temperature of the bottom of the unit may rise during normal  
operation, and after an extended period of time, could cause discomfort or burns.  
Provide adequate air circulation to prevent internal overheating. Do not place your computer on porous surfaces such as  
rugs, blankets, couches, beds, or near draperies that may block its air vents.  
Use only specified peripheral equipment and interface cables.  
Power Source  
Do not place the AC adapter in contact with your skin. Remove the AC adapter away from your body if it becomes warm  
and causes discomfort.  
Do not place heavy objects on the power cord, or this could cause a fire.  
To disconnect the cord, pull it out by holding the plug. Never pull the cord itself.  
Unplug your computer from the AC outlet if you are not planning to use the computer for an extended period of time.  
When the AC adapter is not used, unplug it from the AC outlet.  
Make sure that the AC outlet is easily accessible.  
 
   
Precautions >  
Safety Information  
105  
Battery Pack  
Do not leave battery packs in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight.  
Certain rechargeable battery packs do not meet Sony quality and safety standards. For safety reasons this computer only  
functions with genuine Sony battery packs designed for this model. If an unauthorized battery pack is installed, the battery  
pack will not be charged and the computer will not function.  
Keep the battery pack away from all sources of heat.  
Keep the battery pack dry.  
Do not open or try to disassemble the battery pack.  
Do not expose the battery pack to any mechanical shock, such as dropping it on a hard surface.  
If you are not using your computer for an extended period of time, remove the battery pack from the computer to prevent  
damage to the battery pack.  
If you have not used the battery pack for a considerable amount of time, the remaining battery life may become short.  
This is normal and does not indicate a malfunction. The battery pack will gradually discharge over time even while not in  
use. Connect the AC adapter to your computer and recharge the battery pack before using the computer again.  
Headphones  
Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic  
hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at  
pedestrian crossings.  
Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud  
and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.  
 
 
Precautions >  
Safety Information  
106  
"Memory Stick"  
Keep "Memory Stick" and "Memory Stick" adaptors out of reach of children. There is a risk of swallowing them.  
 
 
Precautions >  
Care and Maintenance Information  
107  
Care and Maintenance Information  
Computer  
Clean the cabinet with a soft, dry or lightly moistened cloth with a mild detergent solution. Do not use an abrasive pad,  
scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer.  
Make sure you unplug the AC adapter and remove the battery pack before cleaning your computer.  
LCD Screen  
Use a soft, dry cloth to wipe the surface of the LCD screen. Rubbing the surface could damage the screen.  
Built-in Camera  
Clean the lens protection cover of the built-in camera with a blower brush or a soft brush. If the cover is extremely dirty, wipe  
it off with a soft dry cloth. Do not rub the cover, as it is sensitive to pressure.  
Discs  
Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol,  
commercially available cleaners, or anti-static spray) which may cause damage to the disc.  
For normal cleaning, hold the disc by its edges and use a soft cloth to wipe the surface from the center out.  
If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from  
the center out. Wipe off any remaining moisture with a dry soft cloth.  
 
     
Precautions >  
Handling Your Computer  
108  
Handling Your Computer  
If you drop a solid object or any liquid onto your computer, shut down the computer, unplug it, and remove the battery  
pack. You may want to have the computer checked by qualified personnel before operating it again.  
Do not drop your computer or place any objects on top of the computer.  
Do not place your computer in a location subject to:  
Heat sources, such as radiators or air ducts  
Direct sunlight  
Excessive dust  
Moisture or rain  
Mechanical vibration or shock  
Strong magnets or speakers that are not magnetically shielded  
Ambient temperature of more than 35°C or less than 5°C  
High humidity  
Do not place electronic equipment near your computer. The electromagnetic field of the equipment may cause the  
computer to malfunction.  
Your computer uses high-frequency radio signals and may cause interference to radio or TV reception. If this occurs,  
relocate the computer a suitable distance away from the set.  
Do not use cut or damaged connection cables.  
If your computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In  
such a case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and  
contact VAIO-Link.  
To avoid losing data when your computer is damaged, back up your data regularly.  
 
   
Precautions >  
Handling Your Computer  
109  
Do not exert pressure on the LCD screen or its edges when opening the LCD screen lid or lifting your computer. The LCD  
screen may be sensitive to pressure or added stress, and exerting pressure may damage the screen or cause it to  
malfunction. To open the computer, hold the base with one hand and gently lift the LCD screen lid with the other. To carry  
the computer with the lid open, be sure to hold the computer with both hands.  
Use a carrying case specially designed to carry your computer.  
 
 
Precautions >  
Handling the LCD Screen  
110  
Handling the LCD Screen  
Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be sure to block direct sunlight when  
using your computer near a window.  
Do not scratch the surface of the LCD screen or exert pressure on it. This could cause a damage.  
Using your computer in low temperature conditions may produce a residual image on the LCD screen. This is not a  
malfunction. When the computer returns to normal temperature, the screen returns to normal.  
A residual image may appear on the LCD screen if the same image is displayed for an extended period of time. The  
residual image disappears after a while. You can use a screen saver to prevent residual images.  
The LCD screen becomes warm during operation. This is normal and does not indicate a malfunction.  
The LCD screen is manufactured using high-precision technology. You may, however, see tiny black points and/or bright  
points (red, blue, or green) that continuously appear on the LCD screen. This is a normal result of the manufacturing  
process and does not indicate a malfunction.  
Do not change the LCD screen orientation setting in the Tablet PC Settings window even when there are change options  
available for selection, as this may make your computer unstable. Sony assumes no liability for any malfunctions arising  
from changes to the settings.  
Do not exert pressure on the LCD screen lid with the lid closed as it may scratch the LCD screen or soil it.  
 
     
Precautions >  
Using the Power Source  
111  
Using the Power Source  
See the specifications to find out about the configuration of your computer.  
Do not share the AC outlet with other power-consuming equipment, such as a photocopier or a shredder.  
You can purchase a power strip with a surge protector. This device helps prevent damage to your computer caused by  
sudden power surges, in an electrical storm, for example.  
Use the AC adapter supplied with your computer or genuine Sony products. Do not use any other AC adapter as it may  
cause a malfunction.  
 
   
Precautions >  
Handling the Built-in Camera  
112  
Handling the Built-in Camera  
Do not touch the lens protection cover of the built-in camera, as it may cause scratches on the cover and such scratches  
will appear on the captured images.  
Do not let the direct sunlight get into the lens of the built-in camera regardless of your computer's power state, as it may  
cause the camera to malfunction.  
 
   
Precautions >  
Handling Discs  
113  
Handling Discs  
Fingerprints and dust on the surface of a disc may cause read errors. Be sure to hold the disc by its edges and central  
hole, as shown below:  
Never affix an adhesive label to a disc. This will affect the use of the disc and may result in irreparable damage.  
 
   
Precautions >  
Using the Battery Pack  
114  
Using the Battery Pack  
Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures.  
Charge battery packs at temperatures between 10°C to 30°C. Lower temperatures require longer charging time.  
While the battery pack is in use or being charged, heat builds up in the battery pack. This is normal and is not cause for  
concern.  
You do not need to discharge the battery pack before recharging.  
If the battery pack quickly runs out of power after being fully charged, it may be reaching the end of its life and should be  
replaced.  
 
   
Precautions >  
Handling "Memory Stick"  
115  
Handling "Memory Stick"  
Do not touch the "Memory Stick" connector with your finger or metallic objects.  
Use only the adhesive label supplied with "Memory Stick".  
Do not bend, drop, or expose "Memory Stick".  
Do not disassemble or modify "Memory Stick".  
Keep "Memory Stick" dry.  
Do not use or store "Memory Stick" in a location subject to:  
Static electricity  
Electrical noise  
Extremely high temperatures, such as in a car parked in the sun  
Direct sunlight  
High humidity  
Corrosive substances  
Use the storage case supplied with "Memory Stick".  
Be sure to make a backup copy of your valuable data.  
When using "Memory Stick Duo", do not use a fine-tipped pen to write on the label adhered to "Memory Stick Duo".  
Exerting pressure on the media may damage internal components.  
 
   
Precautions >  
Handling the Built-in Storage Device  
116  
Handling the Built-in Storage Device  
The built-in storage device (hard disk drive or solid state drive) has a high storage density and reads or writes data in a short  
time. However, it can be easily damaged if improperly used. If the built-in storage device is damaged, the data cannot be  
restored. To prevent losing data, you should be careful when handling your computer.  
Some features and options in this section may not be available on your computer.  
See the specifications to find out about the configuration of your computer.  
To avoid damaging your hard disk drive  
Do not subject your computer to sudden movements.  
Keep your computer away from magnets.  
Do not place your computer in a location subject to mechanical vibration or in an unstable position.  
Do not move your computer while the power is on.  
Do not turn off the power or restart your computer while reading or writing data to the hard disk drive.  
Do not use your computer in a place subject to extreme changes in temperature.  
Do not remove the hard disk drive from your computer.  
To avoid damaging your solid state drive  
Do not turn off the power or restart your computer while reading or writing data to the solid state drive.  
Do not remove the solid state drive from your computer.  
 
   
Troubleshooting >  
117  
Troubleshooting  
This section describes how to solve common problems you might encounter when using your VAIO computer. Many problems  
have simple solutions. Try these suggestions before contacting VAIO-Link.  
Some features and options in this section may not be available on your computer.  
Computer Operations (page 119)  
System Update / Security (page 125)  
Recovery (page 127)  
Battery Pack (page 129)  
Built-in Camera (page 131)  
Networking (LAN/Wireless LAN) (page 133)  
Wireless WAN (page 136)  
Bluetooth Technology (page 137)  
Optical Discs (page 141)  
Display (page 142)  
Printing (page 146)  
Microphone (page 147)  
Speakers (page 148)  
Touch Pad (page 150)  
Keyboard (page 151)  
 
   
Troubleshooting >  
118  
Floppy Disks (page 152)  
Audio/Video (page 153)  
"Memory Stick" (page 155)  
Peripherals (page 156)  
 
 
Troubleshooting >  
Computer Operations  
119  
Computer Operations  
What should I do if my computer does not start?  
Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.  
Make sure the battery pack is installed properly and charged.  
Disconnect all connected USB devices (if any), and then restart your computer.  
Remove any extra memory modules you may have installed since purchase, and then restart your computer.  
If your computer is plugged into a power strip or an uninterruptible power supply (UPS), make sure the power strip or UPS  
is plugged into a power source and turned on.  
If you are using an external display, make sure it is plugged into a power source and turned on. Make sure the brightness  
and contrast controls are adjusted correctly. See the manual that came with your display for more information.  
Unplug the AC adapter and remove the battery pack. Wait three to five minutes. Reinstall the battery pack, plug the AC  
adapter, and then press the power button to turn on your computer.  
Condensation may cause your computer to malfunction. If this occurs, do not use the computer for at least one hour.  
Check that you are using the supplied Sony AC adapter. For your safety, use only the genuine Sony rechargeable battery  
pack and AC adapter, which are supplied by Sony for your VAIO computer.  
 
   
Troubleshooting >  
Computer Operations  
120  
What should I do if the green power indicator light turns on but my screen remains blank?  
Press the Alt+F4 keys several times to close the application window. An application error may have occurred.  
If the Alt+F4 keys do not work, click Start, the arrow next to the Shut down button, and Restart to restart your computer.  
If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow  
button and Restart.  
next to the Shut down  
If the Windows Security window appears, click Restart.  
If this procedure does not work, press and hold the power button for more than four seconds to shut down your computer.  
Unplug the AC adapter and leave the computer for about five minutes. Then plug the AC adapter and turn on the computer  
again.  
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.  
 
 
Troubleshooting >  
Computer Operations  
121  
What should I do if my computer or software stops responding?  
If your computer stops responding while a software application is running, press the Alt+F4 keys to close the application  
window.  
If the Alt+F4 keys do not work, click Start and the Shut down button to turn off your computer.  
If your computer does not turn off, press the Ctrl+Alt+Delete keys and click the Shut down button.  
If the Windows Security window appears, click Shut Down.  
If this procedure does not work, press and hold the power button until the computer turns off.  
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.  
Unplug the AC adapter and remove the battery pack. Wait three to five minutes. Reinstall the battery pack, plug the AC  
adapter, and then press the power button to turn on your computer.  
Try reinstalling the software.  
Contact the software publisher or designated provider for technical support.  
 
 
Troubleshooting >  
Computer Operations  
122  
Why doesn't my computer enter Sleep or Hibernate mode?  
Your computer may become unstable if the operating mode is changed before the computer completely enters Sleep or  
Hibernate mode.  
To restore your computer to Normal mode  
1
2
3
Close all open programs.  
Click Start, the arrow next to the Shut down button, and Restart.  
If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and  
Restart.  
If the Windows Security window appears, click Restart.  
4
If this procedure does not work, press and hold the power button until the computer turns off.  
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.  
What should I do if the charge indicator light is blinking fast and my computer does not  
start?  
This problem could be due to the battery pack not being installed properly. To solve this problem, turn off your computer  
and remove the battery pack. Then reinstall the battery pack to the computer. For details, see Installing/Removing the  
Battery Pack (page 20).  
If the problem persists, it means the installed battery pack is not compatible. Remove the battery pack and contact VAIO-  
Link.  
 
 
Troubleshooting >  
Computer Operations  
123  
Why does the System Properties window display a slower CPU speed than the  
maximum?  
This is normal. Because your computer's CPU utilizes a type of CPU speed controlling technology for power conservation  
purposes, System Properties may display the current CPU speed instead of the maximum speed.  
What should I do if my computer does not accept my password and returns a message,  
Enter Onetime Password?  
If you enter a wrong power-on password three times consecutively, the Enter Onetime Password message appears and  
Windows will not start. Press and hold the power button for more than four seconds to check that the power indicator light  
turns off. Wait for 10 to 15 seconds, then restart your computer and enter the correct password. The password is case  
sensitive, so be sure to check letters for the current case before you enter the password.  
What should I do if my game software does not work or it keeps crashing?  
Check the web site of the game if there are any patches or updates to download.  
Make sure you have installed the latest video driver software.  
On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in such a case  
is not guaranteed.  
Why doesn't my screen turn off after the automatic turn-off time has passed?  
Some software applications or screen savers are designed to temporarily disable the feature of your operating system that  
turns off the computer screen or places the computer into Sleep mode after a certain period of inactivity. To solve this  
problem, exit the running software application(s) or change the current screen saver.  
 
 
Troubleshooting >  
Computer Operations  
124  
How can I change the boot device order?  
You can use one of the BIOS functions to change the boot device order. Follow these steps:  
1
2
Turn on your computer.  
Press the F2 key when the VAIO logo appears.  
The BIOS setup screen appears. If the screen does not appear, restart the computer and press the F2 key several times  
when the VAIO logo appears.  
3
4
5
6
Press the < or , key to select Boot.  
Press the M or m key to select the drive whose boot device order you want to change.  
Press the F5 or F6 key to change the boot device order.  
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.  
At the confirmation prompt, press the Enter key.  
What should I do if I cannot boot my computer from the external device connected to the  
computer?  
To boot your computer from an external device, for example a USB floppy disk drive or a USB/i.LINK optical disc drive, you  
need to change the boot device. To change the boot device, turn on your computer and press the F11 key when the VAIO  
logo appears.  
!
When using a USB/i.LINK optical disc drive, be sure to connect it to an AC power source in advance.  
 
 
Troubleshooting >  
System Update / Security  
125  
System Update / Security  
How can I find important updates for my computer?  
You can find and install the latest updates on your computer with the software applications: the Windows Update and the  
VAIO Update. See Updating Your Computer (page 31) for more information.  
How can I protect my computer against security threats, such as viruses?  
The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against  
security threats, such as viruses, is to download and install the latest Windows updates regularly.  
You can get important Windows updates by doing the following:  
!
Your computer must be connected to the Internet to download the updates.  
1
2
3
4
Click Start and Control Panel.  
Click System and Security.  
Click Action Center.  
Follow the on-screen instructions to set up automatic or scheduled updates.  
 
   
Troubleshooting >  
System Update / Security  
126  
How do I keep my antivirus software updated?  
You can keep the McAfee software program current with the latest updates from McAfee, Inc.  
To download and install the latest security updates, follow these steps:  
!
Your computer must be connected to the Internet to download the updates.  
1
2
3
Click Start, All Programs, McAfee, and McAfee SecurityCenter.  
Click the button located at the upper left corner of the window to update the software.  
Follow the on-screen instructions to download updates.  
See the help file included with your software program for more information.  
 
 
Troubleshooting >  
Recovery  
127  
Recovery  
How can I create recovery discs?  
You can create recovery discs using the VAIO Recovery Center. The discs are used to restore your computer system to its  
factory default settings. To create the discs, click Start, All Programs, VAIO Recovery Center, and Create Recovery  
Discs.  
!
If your computer is not equipped with a built-in optical disc drive, you need to connect an external optical disc drive (not supplied).  
See the Recovery and Troubleshooting Guide for more information.  
How can I restore my computer system to its factory default settings?  
There are two ways to recover your computer system: from recovery discs or from a recovery partition.  
See the Recovery and Troubleshooting Guide for more information.  
How can I reinstall the original software and drivers?  
You can restore the preinstalled software and drivers using the VAIO Recovery Center. To restore them, click Start, All  
Programs, VAIO Recovery Center, and Reinstall Programs or Drivers.  
See the Recovery and Troubleshooting Guide for more information.  
 
   
Troubleshooting >  
Recovery  
128  
How do I check the volume of the recovery partition?  
Your built-in storage device contains the recovery partition where the data for the system recovery is stored. To check the  
volume of the recovery partition, follow these steps:  
1
2
Click Start, right-click Computer, and select Manage.  
Click Disk Management under Storage in the left pane.  
The volume of the recovery partition and the total volume of the C drive are displayed in the Disk 0 row in the center pane.  
 
 
Troubleshooting >  
Battery Pack  
129  
Battery Pack  
How do I find the battery charging status?  
You can check the charge indicator for the battery charging status. See Charging the Battery Pack (page 23) for more  
information.  
When is my computer using AC power?  
When your computer is connected to an AC outlet with the AC adapter, it uses AC power, even if the battery pack is installed.  
When should I recharge the battery pack?  
Recharge the battery pack when:  
The battery pack is running out of power and both the charge and power indicator lights blink.  
You have not used the battery pack for an extended period of time.  
When should I replace the battery pack?  
A message prompting you to replace the battery pack appears when the battery pack reaches the end of its life. You can  
check the battery charge capacity with the Battery function on the VAIO Control Center.  
Should I be concerned that the installed battery pack is warm?  
No, it is normal for the battery pack to be warm while it is powering your computer.  
 
   
Troubleshooting >  
Battery Pack  
130  
Can my computer enter Hibernate mode while running on battery power?  
Your computer can enter Hibernate mode while running on battery power, but some software programs and peripheral  
devices prevent the system from entering Hibernate mode. If you are using a program that prevents the system from entering  
Hibernate mode, save your data frequently to avoid losing data. See Using Hibernate Mode (page 30) for information on  
how you can manually activate Hibernate mode.  
Why can't I fully charge my battery pack?  
The battery care function is enabled to extend the life of your battery pack on the VAIO Control Center. Check the settings  
on the VAIO Control Center.  
What should I do if a message appears notifying of either incompatibility or the improper  
installation of the battery pack and my computer then enters Hibernate mode?  
This problem could be due to the battery pack not being installed properly. To solve this problem, turn off your computer  
and remove the battery pack. Then reinstall the battery pack to the computer. For details, see Installing/Removing the  
Battery Pack (page 20).  
If the problem persists, it means the installed battery pack is not compatible. Remove the battery pack and contact VAIO-  
Link.  
 
 
Troubleshooting >  
Built-in Camera  
131  
Built-in Camera  
Why does the viewfinder show no images or poor-quality images?  
The built-in camera cannot be shared by more than one software application. Exit the current application before launching  
another.  
The viewfinder may show some noise, for example horizontal streaks, when you are viewing a rapid-moving object. This  
is normal and does not indicate a malfunction.  
If the problem persists, restart your computer.  
Why are captured images poor in quality?  
The images captured under the fluorescent light may show reflections of light.  
A dark portion in captured images may appear as a noise.  
If the lens protection cover is dirty, you cannot take a clear shot. Clean the cover. See Built-in Camera (page 107).  
What should I do if captured images contain dropped frames and audio interruptions?  
The effect settings on your software application may cause dropped frames. See the help file included with your software  
application for more information.  
There may be more software applications running than your computer can handle. Exit the applications that you are not  
currently using.  
The power management function of your computer may be active. Check the CPU performance.  
 
   
Troubleshooting >  
Built-in Camera  
132  
What should I do if movie playback shows dropped frames while my computer is running  
on battery power?  
The battery pack is running out of power. Connect your computer to an AC outlet.  
What should I do if captured images flicker?  
This problem occurs when you use the camera under fluorescent lights due to a mismatch between the lighting output  
frequency and the shutter speed.  
To reduce flicker noise, change the direction of the camera or the brightness of camera images. In some software  
applications, you can set an appropriate value to one of the camera properties (e.g. light source, flicker, etc.) to eliminate  
flicker noise.  
Why is the video input from the built-in camera suspended for a few seconds?  
The video input may be suspended for a few seconds if:  
a shortcut key with the Fn key is used.  
the CPU load increases.  
This is normal and does not indicate a malfunction.  
What should I do if my computer becomes unstable when it enters a power saving mode  
while the built-in camera is in use?  
If your computer automatically enters Sleep or Hibernate mode, change the corresponding power saving mode setting. To  
change the setting, see Using the Power Saving Modes (page 28).  
 
 
Troubleshooting >  
Networking (LAN/Wireless LAN)  
133  
Networking (LAN/Wireless LAN)  
What should I do if my computer cannot connect to a wireless LAN access point?  
Connection capability is affected by distance and obstructions. You may need to move your computer away from  
obstructions or closer to any access point you may be using.  
Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer.  
Make sure power to the access point is on.  
Follow these steps to check the settings:  
1
2
3
Click Start and Control Panel.  
Click View network status and tasks under Network and Internet.  
Click Connect to a network to confirm that your access point is selected.  
Make sure the encryption key is correct.  
Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting  
any other option may result in a communication failure. To change the settings, follow these steps:  
1
2
3
4
5
6
Right-click the power status icon on the taskbar and select Power Options.  
Click Change plan settings.  
Click Change advanced power settings.  
Select the Advanced settings tab.  
Double-click Wireless Adapter Settings and Power Saving Mode.  
Select Maximum Performance from the drop-down list both for On battery and Plugged in.  
 
     
Troubleshooting >  
Networking (LAN/Wireless LAN)  
134  
What should I do if I cannot access the Internet?  
Check the access point settings. See the manual that came with your access point for more information.  
Make sure your computer and the access point are connected to one another.  
Move your computer away from obstacles or closer to any access point you may be using.  
Make sure your computer is properly configured for Internet access.  
Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting  
any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot  
connect to a wireless LAN access point? (page 133) to change the settings.  
Why is the data transfer speed slow?  
The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other  
factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed,  
move your computer away from obstacles or closer to any access point you may be using.  
If you are using a wireless LAN access point, the device may be temporarily overloaded depending on how many other  
devices are communicating via the access point.  
If your access point interferes with other access points, change the access point channel. See the manual that came with  
your access point for more information.  
Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting  
any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot  
connect to a wireless LAN access point? (page 133) to change the settings.  
 
 
Troubleshooting >  
Networking (LAN/Wireless LAN)  
135  
How do I avoid data transfer interruptions?  
While your computer is connected to an access point, data transfer interruptions may occur if a large file is exchanged or  
the computer is placed in close proximity to microwaves and cordless telephones.  
Move your computer closer to the access point.  
Make sure the access point connection is intact.  
Change the access point channel. See the manual that came with your access point for more information.  
Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting  
any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot  
connect to a wireless LAN access point? (page 133) to change the settings.  
What are channels?  
Wireless LAN communication uses divided frequency bands known as channels. Third-party wireless LAN access point  
channels may be preset to different channels from Sony devices.  
If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your  
access point.  
Why does the network connection stop when I change the encryption key?  
Two computers with the wireless LAN function may lose a peer-to-peer network connection if the encryption key is changed.  
You can either change the encryption key back to the original profile or re-enter the key on both computers so the key  
matches.  
 
 
Troubleshooting >  
Wireless WAN  
136  
Wireless WAN  
What should I do if my computer cannot connect to the wireless WAN?  
Make sure the battery pack is installed properly and charged.  
Make sure the SIM card is 3G data enabled and activated by your telecom operator. When inserting the SIM card, be sure  
to follow the procedure in Inserting a SIM Card (page 59).  
Your mobile phone network needs to cover your area. Contact your network provider for information on the network  
coverage.  
Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer.  
Make sure the switch next to Wireless WAN is set to On in the VAIO Smart Network window.  
You may need to manually enter Access Point Name (APN) information in your connection manager software. In such a  
case, make sure you have correct APN information from your telecom operator. See the help file included with the  
connection manager software for more information.  
Check that your connection manager software has detected the wireless WAN modem successfully. It may take some  
time for the software to detect the wireless WAN modem.  
For further information on the wireless WAN function, visit the VAIO support web site at http://www.vaio-link.com/troubleshoot/wwan/ regularly.  
 
   
Troubleshooting >  
Bluetooth Technology  
137  
Bluetooth Technology  
What should I do if other Bluetooth devices cannot find my computer?  
Make sure both devices have the Bluetooth function enabled.  
Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer.  
You cannot use the Bluetooth function while your computer is in a power saving mode. Bring the computer back to Normal  
mode, then turn on the WIRELESS switch.  
Your computer and the device may be too far apart. Wireless Bluetooth technology works best when the devices are within  
10 meters of each other.  
What should I do if I cannot find the Bluetooth device I want to communicate with?  
Check that the Bluetooth function of the device you want to communicate with is on. See the other device's manual for  
more information.  
If the device you want to communicate with is already communicating with another Bluetooth device, it may not be found  
or it may not be able to communicate with your computer.  
To allow other Bluetooth devices to communicate with your computer, follow these steps:  
1
2
3
Click Start and Devices and Printers.  
Right-click the Bluetooth device icon and click Bluetooth settings.  
Click the Options tab and select the Allow Bluetooth devices to find this computer check box.  
 
     
Troubleshooting >  
Bluetooth Technology  
138  
What should I do if other Bluetooth devices cannot connect to my computer?  
Check the suggestions in What should I do if I cannot find the Bluetooth device I want to communicate with? (page  
137).  
Make sure the other devices are authenticated.  
The data transfer distance can be shorter than 10 meters depending on existing obstacles between the two devices, on  
radio wave quality, and on the operating system or the software in use. Move your computer and Bluetooth devices closer  
to each other.  
Why is my Bluetooth connection slow?  
The data transfer speed depends on the obstructions and/or the distance between the two devices, on the radio wave  
quality, and on the operating system or the software in use. Move your computer and Bluetooth devices closer to each  
other.  
The 2.4 GHz radio frequency used by Bluetooth and wireless LAN devices is also used by other devices. Bluetooth  
devices incorporate technology that minimizes interference from other devices using the same wavelength, however,  
communication speed and connection range may be reduced. Interference from other devices may also stop  
communications altogether.  
Connection capability is affected by distance and obstructions. You may need to move your computer away from obstacles  
or closer to the device to which it is connected.  
Identify and remove obstacles between your computer and the device to which it is connected.  
Why can't I use the services supported by the connected Bluetooth device?  
Connection is only possible for services also supported by the computer with the Bluetooth function. For more details, search  
Windows Help and Support for Bluetooth information.  
 
 
Troubleshooting >  
Bluetooth Technology  
139  
Can I use a device with Bluetooth technology on airplanes?  
With Bluetooth technology, your computer transmits a radio frequency of 2.4 GHz. Sensitive locations, such as hospitals and  
airplanes, may have restrictions on use of Bluetooth devices to avoid radio interference. Check with facility staff to see if use  
of the Bluetooth function on the computer is permitted.  
Why can't I use the Bluetooth function when I log onto my computer as a user with a  
standard user account?  
The Bluetooth function may not be available to a user with a standard user account on your computer. Log onto the computer  
as a user with administrative rights.  
Why can't I use the Bluetooth devices when I switch users?  
If you switch users without logging off your system, the Bluetooth devices will not work. Be sure to log off before switching  
users. To log off your system, click Start, the arrow next to the Shut down button, and Log off.  
Why can't I exchange business card data with a mobile phone?  
The business card exchange function is not supported.  
 
 
Troubleshooting >  
Bluetooth Technology  
140  
What should I do if I do not hear sound from my headphones or audio/video controller?  
Check the SCMS-T settings. If your headphones or audio/video controller does not support SCMS-T content protection, you  
need to connect the device using the Advanced Audio Distribution Profile (A2DP). Follow these steps:  
1
2
3
4
Click Start and Devices and Printers.  
Right-click the icon for the device that you want to connect using the A2DP and select Control.  
Click SCMS-T Settings.  
Click to cancel the Connect to a device only if it supports SCMS-T content protection check box.  
What should I do if the Bluetooth icon is not displayed on the taskbar?  
Make sure that the switch next to Bluetooth is set to On in the VAIO Smart Network window.  
To display the Bluetooth icon on the taskbar, follow these steps:  
1
2
3
Click Start and Devices and Printers.  
Right-click the Bluetooth device icon and click Bluetooth settings.  
Click the Options tab and select the Show the Bluetooth icon in the notification area check box.  
 
 
Troubleshooting >  
Optical Discs  
141  
Optical Discs  
What should I do if my external optical disc drive does not work properly?  
Make sure that your external optical disc drive is connected to an AC power source and the USB port on your computer. If it  
is not connected, the external optical disc drive may not work properly.  
 
   
Troubleshooting >  
Display  
142  
Display  
Why did my screen go blank?  
Your computer screen may go blank if the computer loses power or enters a power saving mode (Sleep or Hibernate). If  
the computer is in LCD (Video) Sleep mode, press any key to bring the computer back into Normal mode. See Using the  
Power Saving Modes (page 28) for more information.  
Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.  
If your computer is running on battery power, make sure the battery pack is installed properly and is charged. See Using  
the Battery Pack (page 20) for more information.  
If the display output is directed to the external display, press the Fn+F7 keys. See Combinations and Functions with  
the Fn Key (page 33) for more information.  
 
   
Troubleshooting >  
Display  
143  
What should I do if I do not see proper images or videos?  
Be sure to select True Color (32 bit) for the display colors before using video/image software or starting DVD playback.  
Selecting any other option may prevent such software from displaying images successfully. To change the display colors,  
follow these steps:  
1
2
3
4
Right-click on the desktop and select Screen resolution.  
Click Advanced settings.  
Click the Monitor tab.  
Select True Color (32 bit) under Colors.  
Do not change the display resolution or colors while using video/image software or playing DVDs, as it may cause  
unsuccessful playback/display or unstable system operations.  
Additionally, it is recommended you disable your screen saver before starting DVD playback. If the screen saver is  
enabled, it may be activated during DVD playback and prevent the playback from running successfully. Some screen  
savers have been found to even change the display resolution and colors.  
What should I do if no image is displayed on my TV screen or external display connected  
to the HDMI output port?  
Make sure you are using an HDCP-compliant display. The copyright protected content is not displayed on a non-HDCP  
compliant display. See Connecting a TV with an HDMI Input Port (page 75) or Connecting a Computer Display or a  
Projector (page 73) for more information.  
 
 
Troubleshooting >  
Display  
144  
Why doesn't my screen display a video?  
If the display output is directed to the external display and the external display is disconnected, you cannot display a video  
on your computer screen. Stop video playback, change the display output to the computer screen, and then restart video  
playback. See Selecting Display Modes (page 77) for changing the display output. Alternatively, you can press the  
Fn+F7 keys to change the display output. See Combinations and Functions with the Fn Key (page 33) for more  
information.  
The video memory of your computer may be insufficient for displaying high resolution videos. In such a case, lower the  
resolution of the LCD screen.  
To change the screen resolution, follow these steps:  
1
2
3
Right-click on the desktop and select Screen resolution.  
Click the drop-down list next to Resolution.  
Move the slider up to increase or down to decrease the screen resolution.  
You can check the total amount of the graphics and video memory available. Right-click on the desktop, select Screen resolution, and click Advanced  
Settings and the Adapter tab. The displayed value may be different from the actual amount of memory on your computer.  
What should I do if my screen is dark?  
Press the Fn+F6 keys to brighten your computer screen.  
What should I do if the external display remains blank?  
Press the Fn+F7 keys to change the display output. See Combinations and Functions with the Fn Key (page 33) for more  
information.  
 
   
Troubleshooting >  
Display  
145  
How do I run Windows Aero?  
To run Windows Aero, follow these steps:  
1
2
Right-click on the desktop and select Personalize.  
Select your desired theme from Aero Themes.  
For information about the Windows Aero features, such as Windows Flip 3D, see Windows Help and Support.  
 
 
Troubleshooting >  
Printing  
146  
Printing  
What should I do if I cannot print a document?  
Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and your computer.  
Make sure your printer is compatible with the Windows operating system installed on your computer.  
You may need to install the printer driver software before you use your printer. See the manual that came with your printer  
for more information.  
If your printer is not functioning after your computer resumes from a power saving mode (Sleep or Hibernate), then restart  
the computer.  
If the bidirectional communication functions are provided with your printer, disabling the functions on your computer may  
enable printing. Follow these steps:  
1
2
3
4
5
Click Start and Devices and Printers.  
Right-click the printer icon and select Properties.  
Click the Ports tab.  
Click to cancel the Enable bidirectional support check box.  
Click OK.  
This disables the bidirectional communication functions of the printer, such as data transfer, status monitoring, and  
remote panel.  
 
   
Troubleshooting >  
Microphone  
147  
Microphone  
What should I do if my microphone does not work?  
If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the  
microphone jack on your computer.  
Your sound input device may have been incorrectly configured. To configure the sound input device, follow these steps:  
1
2
3
4
5
Close all open programs.  
Click Start and Control Panel.  
Click Hardware and Sound.  
Click Manage audio devices under Sound.  
On the Recording tab, select your desired device for sound input and click Set Default.  
How can I prevent microphone feedback?  
Microphone feedback occurs when the microphone receives the sound from a sound output device, such as a speaker.  
To prevent this problem:  
Keep the microphone away from a sound output device.  
Turn down the volume of the speakers and the microphone.  
 
   
Troubleshooting >  
Speakers  
148  
Speakers  
What should I do if I do not hear sound from the built-in speakers?  
If you are using a program that has its own volume control, make sure the volume control is properly set. See the  
program's help file for more information.  
The volume may have been turned off by the Fn+F2 keys. Press them once again.  
The volume may have been minimized by the Fn+F3 keys. Keep pressing the Fn+F4 keys to turn up the volume loud  
enough to hear sound.  
Check the Windows volume controls by clicking the volume icon on the taskbar.  
Your sound output device may have been incorrectly configured. To change the sound output device, see How do I  
change the sound output device? (page 153).  
 
     
Troubleshooting >  
Speakers  
149  
What should I do if my external speakers do not work?  
Check the suggestions in What should I do if I do not hear sound from the built-in speakers? (page 148).  
If you are using a program that has its own volume control, make sure the volume control is properly set. See the  
program's help file for more information.  
Make sure your speakers are properly connected and the volume is turned up loud enough to hear sound.  
Make sure your speakers are designed for computer use.  
If your speakers have a muting button, set the button to off.  
If your speakers require external power, make sure the speakers are connected to a power source. See the manual that  
came with your speakers for more information.  
Check the Windows volume controls by clicking the volume icon on the taskbar.  
Your sound output device may have been incorrectly configured. To change the sound output device, see How do I  
change the sound output device? (page 153).  
 
 
Troubleshooting >  
Touch Pad  
150  
Touch Pad  
What should I do if the touch pad does not work?  
You may have disabled the touch pad before connecting a mouse to your computer. See Using the Touch Pad (page 35).  
Make sure that a mouse is not connected to your computer.  
If the pointer does not move while a software application is running, press the Alt+F4 keys to close the application window.  
If the Alt+F4 keys do not work, press the Windows key once and then the , key several times, select Restart with the  
M or m key, and press the Enter key to restart your computer.  
If your computer does not restart, press the Ctrl+Alt+Delete keys, select the arrow next to the Shut down button with the  
m and , keys, press the Enter key, select Restart with the M or m key, and press the Enter key to restart your computer.  
If this procedure does not work, press and hold the power button until the computer turns off.  
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.  
 
   
Troubleshooting >  
Keyboard  
151  
Keyboard  
What should I do if the keyboard configuration is wrong?  
The language layout of your computer's keyboard is labeled on the packaging box. If you choose a different regional keyboard  
when you complete the Windows setup, the key configuration will be mismatched.  
To change the keyboard configuration, follow these steps:  
1
2
Click Start and Control Panel.  
Click Clock, Language, and Region, and then Change keyboards or other input methods under Region and  
Language.  
3
4
Click Change keyboards on the Keyboards and Languages tab.  
Change the settings as desired.  
What should I do if I cannot enter certain characters with the keyboard?  
If you cannot enter U, I, O, P, J, K, L, M, and so on, the Num Lk key may be activated. Check that the Num lock indicator  
light is unlit. If the Num lock indicator is lit, press the Num Lk key to turn it off before entering these characters.  
 
   
Troubleshooting >  
Floppy Disks  
152  
Floppy Disks  
Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is  
connected?  
Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB  
port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does  
not appear, follow these steps:  
1
2
3
4
5
Close all programs that are accessing the floppy disk drive.  
Wait until the indicator light on the floppy disk drive turns off.  
Push the eject button to remove the disk, and unplug the USB floppy disk drive from your computer.  
Reconnect the floppy disk drive by plugging the USB cable into the USB port.  
Restart the computer by clicking Start, the arrow next to the Shut down button, and Restart.  
What should I do if I cannot write data to a floppy disk?  
Make sure the floppy disk is properly inserted in the drive.  
If the disk is inserted properly and you are still unable to write data to it, the disk may be full or write-protected. You can  
either use a floppy disk that is not write-protected or disable the write-protect feature.  
 
   
Troubleshooting >  
Audio/Video  
153  
Audio/Video  
What should I do if I cannot use my digital video camcorder?  
If a message appears stating that the i.LINK device is disconnected or turned off, the i.LINK cable may not be securely  
plugged into the port on your computer or camcorder. Unplug the cable, and plug it in once again. See Connecting an i.LINK  
Device (page 83) for more information.  
How do I turn off the Windows startup sound?  
To turn off the Windows startup sound, follow these steps:  
1
2
3
4
5
Click Start and Control Panel.  
Click Hardware and Sound.  
Click Manage audio devices under Sound.  
On the Sounds tab, click to cancel the Play Windows Startup sound check box.  
Click OK.  
How do I change the sound output device?  
If you do not hear sound from the device connected to a port, such as the USB port, HDMI output port, optical output port, or  
headphones jack, you need to change the device for sound output.  
1
2
3
4
5
Close all open programs.  
Click Start and Control Panel.  
Click Hardware and Sound.  
Click Manage audio devices under Sound.  
On the Playback tab, select your desired device for sound output and click Set Default.  
 
       
Troubleshooting >  
Audio/Video  
154  
What should I do if I do not hear the sound from the sound output device connected to the  
HDMI output port, optical output port, or headphones jack?  
You need to change the sound output device if you want to hear sound from the device connected to a port, such as the  
HDMI output port, optical output port, or headphones jack. For the detailed procedure, see How do I change the sound  
output device? (page 153).  
If you still hear no sound from the sound output device, follow these steps:  
1
2
3
4
5
Follow steps 1 to 4 in How do I change the sound output device? (page 153).  
On the Playback tab, select the HDMI or S/PDIF icon and click Properties.  
Click the Advanced tab.  
Select the sample rate and bit depth (for example, 48000 Hz, 16 bit) which the device supports.  
Click OK.  
Why do sound interruptions and/or dropped frames occur when I play high-definition  
videos, such as those recorded with the AVCHD digital video camcorder?  
Playing high-definition videos requires substantial hardware resources, such as CPU, GPU, or system memory performance  
on your computer. During the video playback, some operations and/or functions may become unavailable, and sound  
interruptions, dropped frames, and playback failure may occur depending on the configuration of your computer.  
 
 
Troubleshooting >  
"Memory Stick"  
155  
"Memory Stick"  
What should I do if I cannot use "Memory Stick" that was formatted on a VAIO computer  
on other devices?  
You may need to reformat your "Memory Stick".  
Formatting "Memory Stick" erases all data, including music data previously saved on it. Before you reformat "Memory Stick",  
back up important data and confirm that "Memory Stick" does not contain files you want to keep.  
1
2
Copy the data from "Memory Stick" onto your built-in storage device to save data or images.  
Format "Memory Stick" by following the steps in Formatting "Memory Stick" (page 42).  
Can I copy images from a digital camera using "Memory Stick"?  
Yes, and you can view video clips that you have recorded with digital cameras that are compatible with "Memory Stick".  
Why can't I write data to "Memory Stick"?  
Some versions of "Memory Stick" are equipped with an erasure prevention switch to protect data from unintentional erasure  
or overwriting. Make sure the erasure prevention switch is off.  
 
   
Troubleshooting >  
Peripherals  
156  
Peripherals  
What should I do if I cannot connect a USB device?  
If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital  
camera, check if the battery is charged. If you are using a printer, check if the power cable is connected properly to the  
AC outlet.  
Try using another USB port on your computer. The driver software could be installed to the specific port you used the first  
time you connected the device.  
See the manual that came with your USB device for more information. You may need to install software before you connect  
the device.  
Try connecting a simple, low-powered device such as a mouse to test if the port is working at all.  
USB hubs may prevent a device from working because of a power distribution failure. We recommend you connect the  
device directly to your computer without a hub.  
 
   
Trademarks >  
157  
Trademarks  
The trademarks, including but not limited to SONY, the SONY logo, VAIO, and the VAIO logo are either trademarks or  
registered trademarks of Sony Corporation.  
"BRAVIA" is a trademark of Sony Corporation.  
and "Memory Stick", "Memory Stick Duo", "MagicGate", "OpenMG", "Memory Stick PRO", "Memory Stick PRO  
Duo", "Memory Stick PRO-HG Duo", "Memory Stick Micro", "M2", and the "Memory Stick" logo are trademarks or registered  
trademarks of Sony Corporation.  
Walkman is a registered trademark of Sony Corporation.  
Blu-ray Discand the Blu-ray Disc logo are trademarks of the Blu-ray Disc Association.  
Intel, Pentium, Intel SpeedStep, and Atom are trademarks or registered trademarks of Intel Corporation.  
Microsoft, Windows, the Windows logo, and BitLocker are trademarks or registered trademarks of Microsoft Corporation in  
the U.S. and other countries.  
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection.  
Roxio Easy Media Creator is a trademark of Sonic Solutions.  
WinDVD for VAIO and WinDVD BD for VAIO are trademarks of InterVideo, Inc.  
ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. ArcSoft WebCam Companion is a trademark of  
ArcSoft, Inc.  
ATI and ATI Catalyst are trademarks of Advanced Micro Devices, Inc.  
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by  
Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.  
 
   
Trademarks >  
158  
The ExpressCard word mark and logos are owned by the PCMCIA and any use of such marks by Sony Corporation is under  
license. Other trademarks and trade names are those of their respective owners.  
SD Logo is a trademark.  
SDHC Logo is a trademark.  
CompactFlash® is a trademark of SanDisk Corporation.  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing  
LLC.  
"PlaceEngine" is a registered trademark of Koozyt, Inc.  
"PlaceEngine" was developed by Sony Computer Science Laboratories, Inc. and is licensed by Koozyt, Inc.  
, "XMB," and "xross media bar" are trademarks of Sony Corporation and Sony Computer Entertainment Inc.  
"AVCHD" is a trademark of Panasonic Corporation and Sony Corporation.  
All other names of systems, products, and services are trademarks of their respective owners. In the manual, the ™ or ®  
marks are not specified.  
Specifications are subject to change without notice. All other trademarks are trademarks of their respective owners.  
Not all the software listed above may be delivered with your model.  
See the online specifications to find out what software is available for your model.  
 
 
Notice >  
159  
Notice  
© 2010 Sony Corporation. All rights reserved.  
This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any  
machine-readable form without prior written approval.  
Sony Corporation provides no warranty with regard to this manual, the software, or other information contained herein and  
hereby expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this  
manual, the software, or such other information. In no event shall Sony Corporation be liable for any incidental, consequential,  
or special damages, whether based on tort, contract, or otherwise, arising out of or in connection with this manual, the  
software, or other information contained herein or the use thereof.  
In the manual, the ™ or ® marks are not specified.  
Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time  
without notice. The software described herein is governed by the terms of a separate user license agreement.  
Sony Corporation is not liable and will not compensate for any lost recordings made to your computer, external recording  
media, or recording devices or any relevant losses, including when recordings are not made due to reasons including your  
computer failure, or when the contents of a recording are lost or damaged as a result of your computer failure or repair  
undertaken to your computer. Sony Corporation will not restore, recover, or replicate the recorded contents made to your  
computer, external recording media, or recording devices under any circumstances.  
 
   
© 2010 Sony Corporation  
 
 

Sherwood Stereo Receiver RD 7502 User Manual
Sigma Camcorder S2000HD User Manual
Sony DVD Player DAV HDX501W DAV HDX500 User Manual
Sony Network Router BKS R1601 User Manual
Sony Stereo System 3 293 639 111 User Manual
Sony Stereo System STR DE310 User Manual
Sony VCR GV F700 User Manual
Speco Technologies Computer Drive DVRPC16T User Manual
Sunbeam Electric Heater SLP3300 User Manual
Swann Security Camera SW245 SBD User Manual